Tags:
Albums: Misc Rear End (Differential) Pictures
Comment
I just posted a Engine Painting Tips document, also taken from the newsletter and expanded on, and you will see high marks for the Rustoleum Engine Paints. I'm a big fan at this point.
Looks like you had some good results. I did my air breather housing this summer with that Rustoleum paint and was really happy with how it turned out.
I am pretty sure I would have went at it with the impact wire brush, then maybe acetone and steel wool. The control links were not perfect as it at a really thick layer of undercoating and not spending days trying to get it back to metal they were cleaned smoothed down and cleaned over as is. I generally use an engine paint grade primer & paint. I'm now a faithful rustoleum engine paint fan but can't remember what I used on the rear end. It could have been the Rustoleum gloss black but might have been another brand at tht point.
That looks really great! Did you happen to sandblast it or grind it down before painting it? What type of paint did you use?
Started by Jordan Johansen-Moe in 1963/64 Cadillac Specific Discussion yesterday. 0 Replies 0 Likes
Is anyone here planning on going to the Back to the 50’s car show in Minnesota?
Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge yesterday. 2 Replies 0 Likes
Hi allwhere can I find these - 1963 Cadillac Plastic Door Pin Anchors. Mine are from1963 and a little tiredThanksContinue
Started by Kurt in 1963/64 Cadillac Specific Discussion. Last reply by Matti Roth on Saturday. 15 Replies 4 Likes
Many owners have reported oil leaks at the rear main seal even after replacing the seal, myself included. Recently Tony Lentini found a Serviceman bulletin published in February 1965 which details a…Continue
Started by Jason Edge in Restoration Discussion. Last reply by Jason Edge on Thursday. 6 Replies 0 Likes
First, A Big Thank You to CLC Chief Judge Bill Anderson for taking on this daunting task of overhauling the CLC judging system. The old system was very good, however, I believe what Bill and the…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
June 22, 2025 from 8pm to 9:30pm – Zoom
0 Comments 1 Like
© 2025 Created by Jason Edge.
Powered by
You need to be a member of 63/64 Cadillac Website to add comments!
Join 63/64 Cadillac Website