"There is a slot for lateral adjustment. In fact that is how they go in... in stall with nut & washer loose and slight up next to the transmission bell housing and tighten. If yours are a bit worn but still OK you can slide inward a bit to…"
-
Ron Perry
- Male
- East Haddam, CT
- United States
- Blog Posts
- Discussions (13)
- Events
- Photos (2)
- Photo Albums
- Videos
Ron Perry's Discussions
Picture of a1964 Cadillac Sedan de Ville exhaust hanger bracket behind the muffler, installed.
Started this discussion. Last reply by Kurt Feb 12. 1 Reply 0 Likes
Hello, does anyone have a picture showing the bracket, which is directly behind the muffler, showing it installed and how the metal tab sits in the insulator. Thank you, Ron Perry,Continue
Yaw bumpers
Started Feb 22, 2023 0 Replies 0 Likes
Hi Jason thank you for your reply. Your picture shows the bumper nearer to the front of the car my picture shows it towards the rear of the car (from the back of the crossmember) My bumper does look…Continue
Yaw bumpers
Started this discussion. Last reply by Jason Edge Mar 10. 11 Replies 0 Likes
I have sent 2 photos of the Transmission yaw bumpers (side mounts) It appears they only touch the trans bellhousing on the very edge. Is that the correct position? Does not seem right to me but I…Continue
64 tranny mount
Started Sep 27, 2022 0 Replies 0 Likes
Hi Guys Hoping someone could recommend a vender where I can purchase a transmission mount for my 64 Sedan De Ville. Thanks!Continue
Ron Perry's Page
Latest Activity
"May be worth inspecting the yaw mounts before jumping in too deep. Mine still might be good. Might be a good Sunday afternoon project.
To your knowledge, is there any adjustment in these at all?"
"Steel rubber is $245 to revulcanize with 3 week turn around time ... making the $305 price from Caddy Daddy not so bad. Still might want to search. Haven't check Rock Auto yet. Here is the Steele…"
"Thanks for the link! Yeah, CD is always pricey, but in my experience, you are getting a good product."
"Like I thought, Caddy Daddy has them ready to go but they are not cheap, $305. Link: https://www.caddydaddy.com/catalogsearch/result/?q=yaw+mount
You might shop around."
"Yeah, rubber ready to ship would be preferable. Shouldn't need cores. Caddy Daddy appears to have them but as with all thing CD, they are a bit spendy. "
"Steele Rubber (www.steelerubber.com) can revulcanize (add new rubber) to you old mounts. I would check Caddy Daddy, and the other usually suspects for ready to ship yaw mounts with new rubber. If you need good cores I have them for $15…"
"This is a good photo! Is there a reputable source for these yaw bumpers? Id like to replace mine while I've got my teeth up in this area when doing the trans replacement. "
"This is in the Help tab https://6364cadillac.ning.com/photo/albums/exhaust-example-exhaust-pictures-illustrations"
Picture of a1964 Cadillac Sedan de Ville exhaust hanger bracket behind the muffler, installed.
Hello, does anyone have a picture showing the bracket, which is directly behind the muffler, showing it installed and how the metal tab sits in the insulator. Thank you, Ron Perry,See More
"Maybe this pictures will help. Note yaw mount pushing up against the bell housing above the oil pan."
"I looked at the CLC database and my Chapter notes and show own a 1964 Sedan de Ville Four Window (6339) so you would have the Turbo Hydra-Matic transmission and need the longer THM Yaw Mounts. Can't tell from the pictures from m phone what I am…"
"Yaw mounts are mounted above the crossmember pointed up against the curved area of the bell housing. There were two types of Yaw Mounts: a shorter one used the Hydra-Matic transmissions and a longer one used with the Turbo Hydra-Matic. I am…"
64 tranny mount
Hi Guys Hoping someone could recommend a vender where I can purchase a transmission mount for my 64 Sedan De Ville. Thanks!See More
Profile Information
- Do you own any 1963 & 1964 Cadillacs? If Yes, Year & Body Style
- 64 4 window
- Cadillac LaSalle Club Membership Number? (Must be a member to Join Chapter & Website)
- 26153
- 1963/64 Cadillac Chapter Member?
- yes
Ron Perry's Photos
Comment Wall
- No comments yet!
Photos
Members
Forum
Cadmium Plated Cadillac Bolts - More Used that You Can Shake a Dip Stick At!
Started by Jason Edge in General Discussion 12 hours ago. 0 Replies 0 Likes
I have now had just under 3,500 lb of Cadillac fasteners gold cadmium plated, one thing I don't run out of or have to run down to the hardware store are nuts and bolts. I just replaced my 20+ year…Continue
Radiator Re-core PLEASE HELP
Started by Scott Santora in General Discussion. Last reply by Dennis P. DiBari yesterday. 4 Replies 0 Likes
I could use some confirmation. I sent out my radiator for my 63 De Ville to get re-cored. Several weeks later, when I went to pick it up from the service vendor, I noticed a large amount of green…Continue
Trivia #29 - What Movie Is this?
Started by Jason Edge in Trivia. Last reply by Cees de Bunje yesterday. 13 Replies 0 Likes
It has been a while since we did some trivia and I was watching a movie last night and saw this 1964 Coupe de Ville that briefly makes an appearance. The Trivia Question is: What Movie Is this?…Continue
1964 Floor braces rot
Started by Todd Fox in Restoration Discussion. Last reply by Todd Fox on Wednesday. 2 Replies 0 Likes
Has anybody in here found a good supplier of replacement floor braces for the 64 convertibles. Continue
Blog Posts
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 0 Likes
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Vintage Air AC
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 0 Likes
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
accumulator dryer
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
'63 Eldorado trumpet horn + 2 standard horns restoration
Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment 0 Likes
My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns.
There is a restoration service called The Horn Works who my son…
ContinueEvents
-
April 21, 2024 - 63/64 Cadillac Chapter Zoom Meet-Up
April 21, 2024 from 8pm to 9:30pm – Zoom
0 Comments 1 Like
© 2024 Created by Jason Edge.
Powered by
