I live in California and the gas stations all have hose nozzles that have a vapor trap device on them which pushes against the fuel filler pipe. You must depress this collar to start the flow of fuel. Because the filler neck on my 64 is located behind the license plate, the nozzle will not fit against the filler pipe, and thus I need to pull the vapor trap collar back and hold it with my hand. Has anyone come up with an easier way to fill the tank? Is there an extension I can get that I can use when I fill my tank that will seal against the vapor trap collar and the filler pipe?
Tags:
So simple that I had not thought about it. I will see if that solves my problem.
I understand your frustration, I have to turn the pump sideways while pulling back on the collar in order to fuel my 64. it's a pain. You can always buy a long funnel and stick in the filler pipe and fill up that way, you will still have to pull back on the pump collar, but at least you won't be struggling with the angle anymore and possible gas spills.
In the old days the pumps nozzles were long and angled, so you never worried about this kind of thing.
Yes I remember the "old days" as I have had this car since 1974.
Maybe a tube that slips inside the filler neck. Weld a collar about 5 inches above the bottom, so the tube doesn't fall into the filler neck. The tube will stick out far enough so you can fill with the pump handle.
so... a funnel???
I would think of it as an extension. A funnel would have a large opening that the pump nozzle wouldn't engage.
I have several filler tubes. You could possibly cut and weld an extension to your existing one.
Started by Mike Travers in 1963/64 Cadillac Specific Discussion. Last reply by Matti Roth on Tuesday. 1 Reply 0 Likes
My 61 year old radiator sprung a leak (actually a few leaks). What are you guys using as replacements? Are you replacing with copper or aluminum? How many rows are you running in the radiator? How's…Continue
Started by Jeff Donaldson in Wanted to Buy on Monday. 0 Replies 0 Likes
Hi,I need one T-3 low beam headlight if anyone has a spare they would like to sell.CheersJeffContinue
Started by Doug Scarrow in For Sale on Sunday. 0 Replies 0 Likes
just listed https://www.ebay.com/itm/266787800087Correct complete front unit coupling fits 1958 thru 1964 Cadillacs Hydramatic transmission The…Continue
Started by Doug Scarrow in For Sale on Saturday. 0 Replies 0 Likes
Just listed. https://www.ebay.com/itm/266786607755Continue
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 0 Likes
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 0 Likes
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment 0 Likes
My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns.
There is a restoration service called The Horn Works who my son…
Continue© 2024 Created by Jason Edge. Powered by