I need the front bench seat reupholstered with original style material. This is a 1963 Park Avenue with #44 Trim. If anyone can suggest a Cadillac experienced upholsterer it will be appreciated. thank you.
Tags:
SMS auto fabric stocks reproduction original materials. Start there and get in touch with a local upholstery shop.
Thank you. I have contacted SMS and they will send a sample for me to check the match.
Just be aware they take time. A lot of time. Expect the sample in a month. After ordering and paying the full amount expect at least three months waiting before you have the materials.
Just to add, almost any upholstery shop with any history of working on old cars will be very aware of SMS Auto Fabrics. When I had my seats redone my local old school upholstery shop were able to order my Sandalwood Dover fabric for my seats direct from SMS st a discounted price.
If you are doing just the front seats because the back ones are fine, and in many cases they are, make sure you get a large sample to make sure they match. They probably made different run lots and they can be a few shades off and you won't see it until until you reinstall them. A small sample may not show the difference. I ran into this when I did my 76 Coupe De Ville. good luck
Started by Jason Edge in General Discussion. Last reply by Bill Wolf on Friday. 36 Replies 0 Likes
I had brought up the topic of radiator leaks as a discussion topic for our Chapter Zoom meet-up this past Sunday and thought I would share on our website for everyone and probably do a more formal…Continue
Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf on Friday. 2 Replies 0 Likes
Original seats had a crest on the center arm rest. Does anybody know where I could embose a crest in new material for a reupolstry?Continue
Started by Norman Silverman in General Discussion. Last reply by Norman Silverman on Thursday. 11 Replies 0 Likes
Hello AllI have taken off my dash top and started replacing dash bulbs with LED's for greater visibility. Some questions:1) To replace the Gauge bulb it looks like easier access is had by removing…Continue
Started by Richard Stanley in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf on Wednesday. 3 Replies 0 Likes
I just replaced my tires from Diamondback (I had bad results in the past from Coker). It was the second time, due to the age of the tires. About 18 years ago Diamondback made custom whitewalls…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
© 2025 Created by Jason Edge.
Powered by