I need the front bench seat reupholstered with original style material. This is a 1963 Park Avenue with #44 Trim. If anyone can suggest a Cadillac experienced upholsterer it will be appreciated. thank you.
Tags:
SMS auto fabric stocks reproduction original materials. Start there and get in touch with a local upholstery shop.
Thank you. I have contacted SMS and they will send a sample for me to check the match.
Just be aware they take time. A lot of time. Expect the sample in a month. After ordering and paying the full amount expect at least three months waiting before you have the materials.
Just to add, almost any upholstery shop with any history of working on old cars will be very aware of SMS Auto Fabrics. When I had my seats redone my local old school upholstery shop were able to order my Sandalwood Dover fabric for my seats direct from SMS st a discounted price.
If you are doing just the front seats because the back ones are fine, and in many cases they are, make sure you get a large sample to make sure they match. They probably made different run lots and they can be a few shades off and you won't see it until until you reinstall them. A small sample may not show the difference. I ran into this when I did my 76 Coupe De Ville. good luck
Kenneth Barton Online
Travis J. Hensley Online
Started by Bobby Brown in General Discussion. Last reply by Dennis P. DiBari 3 hours ago. 6 Replies 0 Likes
My reservoir is a little low. Any recommendations on my purchase of refill fluid? There are likely new fluids and I’d like to buy the right product. Thanks. Continue
Started by Mark Geertsma in 1963/64 Cadillac Specific Discussion. Last reply by Kenneth Barton 22 hours ago. 2 Replies 0 Likes
Hi all,Again I have issues with my AC system. Had it refilled recently but within a few days the system was empty again. The AC mechanic added tracer fluid to check for leaks, but there are no…Continue
Tags: 1963, core, evaporator, AC
Started by Kevin Robles in 1963/64 Cadillac Specific Discussion. Last reply by Kevin Robles yesterday. 3 Replies 0 Likes
does anyone out there have any experience with seat foam replacement on a 63/64 Cadillac. I had my seats reupolstered many years ago in original leather/fabric and they still look great, but the…Continue
Started by tim sparks in General Discussion on Tuesday. 0 Replies 0 Likes
anybody have an xtra stainless steel shim for 1963 carter afb carb. thank youContinue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
July 20, 2025 from 8pm to 9:30pm – Zoom
0 Comments 0 Likes
© 2025 Created by Jason Edge.
Powered by