Seat Reupholstery
I need the front bench seat reupholstered with original style material. This is a 1963 Park Avenue with #44 Trim. If anyone can suggest a Cadillac experienced upholsterer it will be appreciated. thank you.
Replies to This Discussion
-
Permalink Reply by 3ft7bqmb7dryo on
-
SMS auto fabric stocks reproduction original materials. Start there and get in touch with a local upholstery shop.
-
Permalink Reply by Carl H Baxter on
-
Thank you. I have contacted SMS and they will send a sample for me to check the match.
-
-
Just be aware they take time. A lot of time. Expect the sample in a month. After ordering and paying the full amount expect at least three months waiting before you have the materials.
-
Permalink Reply by Jason Edge on
-
Just to add, almost any upholstery shop with any history of working on old cars will be very aware of SMS Auto Fabrics. When I had my seats redone my local old school upholstery shop were able to order my Sandalwood Dover fabric for my seats direct from SMS st a discounted price.
-
-
If you are doing just the front seats because the back ones are fine, and in many cases they are, make sure you get a large sample to make sure they match. They probably made different run lots and they can be a few shades off and you won't see it until until you reinstall them. A small sample may not show the difference. I ran into this when I did my 76 Coupe De Ville. good luck
Photos
Members
Forum
Burning Rubber
Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion. Last reply by Kurt 4 hours ago. 7 Replies 1 Like
Out of curiosity,, is the 63 64 engine capable of burning rubber off of a stop light? Not a hold the brake and rev up and release, but from a stop, to burn rubber power?I know mine wont because i…Continue
Gas gauge only reads half when full
Started by Kenneth Barton in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin on Wednesday. 1 Reply 0 Likes
Hi everyone, I installed a new gas tank sender in my 63 after bench testing it and confirming ohm range on the bench.However after installing and filling it up, it only reads half full after filling…Continue
64 Brakes
Started by Jeff Donaldson in General Discussion. Last reply by Dennis P. DiBari on Monday. 1 Reply 0 Likes
Hi,It's time to do a brake job on my Fleetwood. When I imported my car from the US to Canada I had to have my car safety inspected before I could license it in the Privince of BC. After the…Continue
Heater Core Replacement
Started by Michael Monson in 1963/64 Cadillac Specific Discussion. Last reply by Michael Monson Feb 15. 6 Replies 0 Likes
I'm currently rounding up parts for a heater core replacement in my 1964 Deville. I'm looking for replacement hoses that connect to the heater core itself. It's a factory a/c car and has the metal…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
New old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
© 2026 Created by Jason Edge.
Powered by
