I am in the middle of doing a carburetor update and I am planning on blocking out the middle exhaust ports on the in manifold as per Jason's instructions on doing this update.  I am going to install an Edelbrock 1406 carb with electric choke.  In the instructions Jason mentions that the intake manifold gaskets should be updated to the thicker kind in order to seal around the metal plate being added to block off the exhaust passage that goes through the intake manifold on the production set up.  Does any one have a place that I can order those type gaskets either online or at an auto parts store.  I am only finding either the same thin type gaskets that are already on the car and won't seal properly, or what looks to be a gasket made from rubber from a company called Fel-Pro, and I don't know if those will do the trick.  I know that I am not the first one to do this update so where can I get the proper gaskets from?  Any suggestions will be greatly appreciated.  

Views: 175

▶ Reply to This

Replies to This Discussion

Hey Pat ,

give me a call ,I’m in the middle of doing my carburetor project right now. I have some useful info for you .email me at schrym@aol.com I’ll  send you my number

 Thanks Ray. 

RSS

Photos

  • Add Photos
  • View All

Forum

Replacement Exhaust System

Started by Tony Prichard in General Discussion. Last reply by Dennis P. DiBari 3 hours ago. 2 Replies

Just wanted to share my experience with Classic Exhaust Systems out of Madison, Ohio. Unfortunately, it hasn’t been a good one.This isn’t my first time installing an exhaust system on a ‘64 Cadillac.…Continue

New Help Topic "AC/Heat: Blower Motors Used in 1963 & 1964" and Future Listings

Started by Jason Edge in General Discussion on Wednesday. 0 Replies

A lot has changed for me in the last year or so!With the help of Chat-GPT and a library of SIX Cadillac Master Parts Books, the 1963 and 1964 Shop Manuals, and a growing list if scanned and…Continue

64 RH front bumper bucket for sale.

Started by Russ Austin in General Discussion on Tuesday. 0 Replies

Is anyone looking for a 64 right side front bumper bucket?  Before I put it on ebay, I thought I would give the group a buzz first.Continue

Rescan of the Serviceman Bulletins Continues - Starting with January 1963

Started by Jason Edge in General Discussion. Last reply by Jason Edge on Saturday. 2 Replies

Way  back we had lower resolution JPG picture scans of the monthly Cadillac Serviceman Bulletins, and started rescanning the October and forward bulletins as higher 600dpi resolution searchable PDF…Continue

Blog Posts

Authenticity Manual

Posted by Dennis P. DiBari on August 27, 2026 at 12:45pm 2 Comments

Hi Robert,

     I emailed you more pictures for the Authenticity Manual.

Dennis DiBari

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Videos

  • Add Videos
  • View All

© 2026   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service