Pulled the distributor and used a drill to prime the engine , Question, is oil suppose to shoot out of the gear shaft ? Been turning the gear clockwise p
Tags:
Put the distributor back in ,set timing. Still seems to be a valve train noise ,shut it down .oil is up to level.filter is full of oil . Should I pack the gears with petroleum jelly ?and fill the oil filter neck with oil . Prior to this I had the front cover off changed the water pump,timing chain & gears. Should I pull the oil pump assembly apart and check the valve etc. Suggestions ?
If I remember correctly when I primed mine, I didn't see oil shooting out of the shaft gear but definitely felt resistance on the drill when the pump was primed and pumping oil. At 1st the drill will spin freely and when oil is pulled in you will feel resistance. Did that happen when you were priming the pump?
Not really Kurt.
I’ll give it another shot
Thanks for everyone’s response, it seems like it’s solved ,took off the valve covers, and even pulled the oil pressure switch ran the drill for a good 10 minutes finally oil shot out of the switch port and oil is bleeding out of the rocker arms . Just waiting on some Bill Hirsh paint to paint and put it all together, paint is on BACKORDER … they said 4-6 weeks! that’s ok, We are at the end of our cruise season up in this part of the states.
Dylan Miles Online
Started by Russ Austin in General Discussion 3 hours ago. 0 Replies 0 Likes
Is anyone looking for a 64 right side front bumper bucket? Before I put it on ebay, I thought I would give the group a buzz first.Continue
Started by Jason Edge in General Discussion. Last reply by Jason Edge on Saturday. 2 Replies 0 Likes
Way back we had lower resolution JPG picture scans of the monthly Cadillac Serviceman Bulletins, and started rescanning the October and forward bulletins as higher 600dpi resolution searchable PDF…Continue
Started by Jeff Donaldson in General Discussion. Last reply by Russ Austin on Saturday. 3 Replies 0 Likes
Hi,I am looking for a replacement for my A/C time delay switch. If anyone has one I would like to buy it. I'm trying to repair what is left of my melted one. I foolishly took it apart without taking…Continue
Started by Jason Edge in General Discussion. Last reply by Jason Edge on Saturday. 4 Replies 0 Likes
On November 13, 1996 I made a purchase that would change my life in a big way ... the purchase of my 1964 Coupe de Ville Dino! I bought it from Robert Jessup in Raleigh NC for $2500 from an ad I…Continue
Posted by Dennis P. DiBari on August 27, 2026 at 12:45pm 2 Comments 0 Likes
Hi Robert,
I emailed you more pictures for the Authenticity Manual.
Dennis DiBari
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
December 13, 2026 from 7pm to 8:30pm – Zoom
1 Comment 0 Likes
© 2026 Created by Jason Edge.
Powered by