63/64 Cadillac Website

body side molding clips

Trying to figure out how to install body side moldings. I have my shop manual out, I've searched Caddy Daaddy and am still at a loss as to what clips and other hardware I need to get this job done.Is there any body willing to walk me thru this mess?

1964, 62 series, 6239, 4 window

Thanks,

Wayne Morris

0 members like this

Facebook Facebook

▶ Reply to This

Replies to This Discussion

Permalink Reply by Russ Austin on February 1, 2024 at 6:46pm

What clips do you have?

▶ Reply

Permalink Reply by Wayne Morris on February 3, 2024 at 2:45pm

I don't have any clips at this time

▶ Reply

Permalink Reply by Jason Edge on February 3, 2024 at 7:24pm

I have the fender, door, and rear qtr side trim fasteners and have been selling them for I guess a decade now. I can send pictures and explain how they go on, but I am heading out a for a 5 day road trip to pick up the next parts car. If you can wait until After Feb 8, email me at jasonedge64@outlook.com and I will send pictures, pricing, and how they attached. Jason.

▶ Reply

Permalink Reply by Jason Edge on February 3, 2024 at 7:25pm

You can see rear qtr fasteners now by Clicking Here.

▶ Reply

Permalink Reply by Wayne Morris on February 4, 2024 at 11:08am

Thank you Jason

▶ Reply

RSS

Welcome to
63/64 Cadillac Website

Sign Up
or Sign In

Or sign in with:

Photos

Members

View All

Forum

Bleeding brakes

Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Tony Prichard 12 hours ago. 4 Replies 0 Likes

I have finished replacing all the rear suspension and am at the last item, which is bleeding the rear brakes. I am using the Jason Edge vacuum pump method and all went well with the rear passenger…Continue

Power steering fluid

Started by Bobby Brown in General Discussion. Last reply by Tony Prichard 12 hours ago. 7 Replies 0 Likes

My reservoir is a little low. Any recommendations on my purchase of refill fluid? There are likely new fluids and I’d like to buy the right product. Thanks. Continue

1963 AC evaporator core leaking?

Started by Mark Geertsma in 1963/64 Cadillac Specific Discussion. Last reply by Kenneth Barton yesterday. 2 Replies 0 Likes

Hi all,Again I have issues with my AC system. Had it refilled recently but within a few days the system was empty again. The AC mechanic added tracer fluid to check for leaks, but there are no…Continue

Tags: 1963, core, evaporator, AC

seat foam replacement

Started by Kevin Robles in 1963/64 Cadillac Specific Discussion. Last reply by Kevin Robles on Wednesday. 3 Replies 0 Likes

does anyone out there have any experience with seat foam replacement on a 63/64 Cadillac. I had my seats reupolstered many years ago in original leather/fabric and they still look great, but the…Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue