Trying to figure out how to install body side moldings. I have my shop manual out, I've searched Caddy Daaddy and am still at a loss as to what clips and other hardware I need to get this job done.Is there any body willing to walk me thru this mess?
1964, 62 series, 6239, 4 window
Thanks,
Wayne Morris
Tags:
What clips do you have?
I don't have any clips at this time
I have the fender, door, and rear qtr side trim fasteners and have been selling them for I guess a decade now. I can send pictures and explain how they go on, but I am heading out a for a 5 day road trip to pick up the next parts car. If you can wait until After Feb 8, email me at jasonedge64@outlook.com and I will send pictures, pricing, and how they attached. Jason.
You can see rear qtr fasteners now by Clicking Here.
Thank you Jason
Started by Jordan Johansen-Moe in 1963/64 Cadillac Specific Discussion 6 hours ago. 0 Replies 0 Likes
Hey everyone, I need to replace my transmission input seal before spring starts, I’ve been losing a lot of fluid post Sunday drive. I figured I’d do the rear main seal service bulletin at the same…Continue
Started by Michael Monson in Wanted to Buy. Last reply by Michael Monson 21 hours ago. 2 Replies 0 Likes
Looking for a heater control valve 9.795 for my 1964 Deville. ThanksContinue
Started by Jeff Donaldson in General Discussion. Last reply by Logan Robb on Tuesday. 4 Replies 0 Likes
Hi,It's time to do a brake job on my Fleetwood. When I imported my car from the US to Canada I had to have my car safety inspected before I could license it in the Privince of BC. After the…Continue
Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion. Last reply by Kurt on Sunday. 7 Replies 1 Like
Out of curiosity,, is the 63 64 engine capable of burning rubber off of a stop light? Not a hold the brake and rev up and release, but from a stop, to burn rubber power?I know mine wont because i…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
© 2026 Created by Jason Edge.
Powered by