I casually mentioned during our Zoom meeting Sunday that there are notches for using the gas cap to hold the license plate door open while filling up and a couple of members indicated they did not know that so I thought it was worth posting here.
I have a couple of other DIDGAKNOWTHAT items, and might make this into another recurring topic.
So, here is DGKT #1:
Gas Tank Filler Cap for Holding License Plate Door Open:
- simply open the license plate - filler door and wedge cap in between arrows as seen below. This is my 64, but the same thing for 63 with notches in same general area.
Wedging cap in notches makes filling up 1000x easier!
Tags:
Hi Jason,
Thank you for answering my question - never knew about this (along with other things I'm sure). I appreciate your feedback!
Dennis DiBari
Thanks Jason!
Actually this is mentioned in Owner’s Manual page 37 but there is no photo.
I always open the cap with right hand and try to fit that to RIGHT SIDE vertically between the door and the chrome frame but usually it does not work.
"Actually this is mentioned in Owner’s Manual page 37 but there is no photo." While it is mentioned in the 1964 owners manual it is not in the 1963 manual. Regardless there is a large % of questions I get asked day to day that are right there in your owners manual.
Travis J. Hensley Online
Started by Jason Edge in Newsletters 8 hours ago. 0 Replies 0 Likes
I have just completed and posted the July 2025, 1963/64 Cadillac Chapter Newsletter to our…Continue
Tags: Chapter, Newsletter, Posted, Cadillac, 1964
Started by Mark Geertsma in 1963/64 Cadillac Specific Discussion. Last reply by Kenneth Barton 19 hours ago. 4 Replies 0 Likes
Hi all,Again I have issues with my AC system. Had it refilled recently but within a few days the system was empty again. The AC mechanic added tracer fluid to check for leaks, but there are no…Continue
Tags: 1963, core, evaporator, AC
Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Tony Prichard yesterday. 4 Replies 0 Likes
I have finished replacing all the rear suspension and am at the last item, which is bleeding the rear brakes. I am using the Jason Edge vacuum pump method and all went well with the rear passenger…Continue
Started by Bobby Brown in General Discussion. Last reply by Tony Prichard yesterday. 7 Replies 0 Likes
My reservoir is a little low. Any recommendations on my purchase of refill fluid? There are likely new fluids and I’d like to buy the right product. Thanks. Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
July 20, 2025 from 8pm to 9:30pm – Zoom
0 Comments 0 Likes
© 2025 Created by Jason Edge.
Powered by