DIDGAKNOWTHAT? - Notches for Holding License Plate Door Open when "Filling Up!"
I casually mentioned during our Zoom meeting Sunday that there are notches for using the gas cap to hold the license plate door open while filling up and a couple of members indicated they did not know that so I thought it was worth posting here.
I have a couple of other DIDGAKNOWTHAT items, and might make this into another recurring topic.
So, here is DGKT #1:
Gas Tank Filler Cap for Holding License Plate Door Open:
- simply open the license plate - filler door and wedge cap in between arrows as seen below. This is my 64, but the same thing for 63 with notches in same general area.
Wedging cap in notches makes filling up 1000x easier!
Replies to This Discussion
-
Permalink Reply by Dennis P. DiBari on
-
Hi Jason,
Thank you for answering my question - never knew about this (along with other things I'm sure). I appreciate your feedback!
Dennis DiBari
-
Permalink Reply by Matti Roth on
-
Thanks Jason!
Actually this is mentioned in Owner’s Manual page 37 but there is no photo.
I always open the cap with right hand and try to fit that to RIGHT SIDE vertically between the door and the chrome frame but usually it does not work.
-
Permalink Reply by Jason Edge on
-
"Actually this is mentioned in Owner’s Manual page 37 but there is no photo." While it is mentioned in the 1964 owners manual it is not in the 1963 manual. Regardless there is a large % of questions I get asked day to day that are right there in your owners manual.
Photos
Members
Forum
Burning Rubber
Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion. Last reply by Kurt 7 hours ago. 7 Replies 1 Like
Out of curiosity,, is the 63 64 engine capable of burning rubber off of a stop light? Not a hold the brake and rev up and release, but from a stop, to burn rubber power?I know mine wont because i…Continue
Gas gauge only reads half when full
Started by Kenneth Barton in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin on Wednesday. 1 Reply 0 Likes
Hi everyone, I installed a new gas tank sender in my 63 after bench testing it and confirming ohm range on the bench.However after installing and filling it up, it only reads half full after filling…Continue
64 Brakes
Started by Jeff Donaldson in General Discussion. Last reply by Dennis P. DiBari Feb 16. 1 Reply 0 Likes
Hi,It's time to do a brake job on my Fleetwood. When I imported my car from the US to Canada I had to have my car safety inspected before I could license it in the Privince of BC. After the…Continue
Heater Core Replacement
Started by Michael Monson in 1963/64 Cadillac Specific Discussion. Last reply by Michael Monson Feb 15. 6 Replies 0 Likes
I'm currently rounding up parts for a heater core replacement in my 1964 Deville. I'm looking for replacement hoses that connect to the heater core itself. It's a factory a/c car and has the metal…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
New old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
© 2026 Created by Jason Edge.
Powered by
