I casually mentioned during our Zoom meeting Sunday that there are notches for using the gas cap to hold the license plate door open while filling up and a couple of members indicated they did not know that so I thought it was worth posting here.
I have a couple of other DIDGAKNOWTHAT items, and might make this into another recurring topic.
So, here is DGKT #1:
Gas Tank Filler Cap for Holding License Plate Door Open:
- simply open the license plate - filler door and wedge cap in between arrows as seen below. This is my 64, but the same thing for 63 with notches in same general area.
Wedging cap in notches makes filling up 1000x easier!
Tags:
Hi Jason,
Thank you for answering my question - never knew about this (along with other things I'm sure). I appreciate your feedback!
Dennis DiBari
Thanks Jason!
Actually this is mentioned in Owner’s Manual page 37 but there is no photo.
I always open the cap with right hand and try to fit that to RIGHT SIDE vertically between the door and the chrome frame but usually it does not work.
"Actually this is mentioned in Owner’s Manual page 37 but there is no photo." While it is mentioned in the 1964 owners manual it is not in the 1963 manual. Regardless there is a large % of questions I get asked day to day that are right there in your owners manual.
Started by Jason Edge in General Discussion. Last reply by Kurt yesterday. 6 Replies 0 Likes
I have got a flood of email, texts, about the 63 Eldo that recently bid up to $120,000 and thought I would share for those that have not seen it.Here is the link:…Continue
Started by Jason Edge in General Discussion yesterday. 0 Replies 0 Likes
Incredibly, in 3 days I have had 3 people ask about replacing their fuel pump or even adding an electric fuel pump because there carb is not getting gas. It has gotten to the point I have copied and…Continue
Started by Phillip Hill in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Monday. 13 Replies 0 Likes
Hi everyone im currently restoring my my front grill due to some previous clown painting it with silver frost paint and doing a dodgy job I would like to know what parts of the grill are anodised.it…Continue
Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge on Monday. 3 Replies 0 Likes
While enjoying the fruits of my labor on all new rear suspension and…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
© 2025 Created by Jason Edge.
Powered by