I have finished replacing all the rear suspension and am at the last item, which is bleeding the rear brakes. I am using the Jason Edge vacuum pump method and all went well with the rear passenger side but when I started the driver rear, no fluid came out when I opened the bleeder!

When I took it apart there was fluid in the line. Now what should be done? Do I check the line from the splitter to the hose? Or is there another check before just replacing the control valve?

Views: 114

▶ Reply to This

Replies to This Discussion

I mean wheel cylinder not control valve!

Hi Dave,

     Albeit the vacuum pump is a method to use to bleed brakes, I find that the best way is to have a person in the vehicle assisting you - it's flawless.  It is the best way to activate full pressure on the master cylinder.  With the master cylinder full, try to disconnect the line from the rubber hose and see if fluid comes out of the line.  If it does, then it's between the hose and/or the cylinder.  You can also remove the bleeder valve from the cylinder and see if it shoots out.  The bleeder could be clogged or dirty.  Give it a try, but have someone pump those brakes.

Dennis DiBari

I find the 2 person method works best. I tried the vacuum pumps and they dont draw on the long lines to the rear very well.

The Motive brake bleeders seem to work pretty well. I haven't done it on my Cadillac yet but it worked pretty well on my other cars. You put brake fluid in the container and then pump up the pressure. An adapter fits over the master cylinder and pressurizes brake fluid through the system. All you do is open the bleed screw and wait for the bubbles to stop.

There's plenty of videos on YouTube that demonstrate it.

RSS

Photos

  • Add Photos
  • View All

Forum

New Help Topic "AC/Heat: Blower Motors Used in 1963 & 1964" and Future Listings

Started by Jason Edge in General Discussion 5 hours ago. 0 Replies

A lot has changed for me in the last year or so!With the help of Chat-GPT and a library of SIX Cadillac Master Parts Books, the 1963 and 1964 Shop Manuals, and a growing list if scanned and…Continue

64 RH front bumper bucket for sale.

Started by Russ Austin in General Discussion 18 hours ago. 0 Replies

Is anyone looking for a 64 right side front bumper bucket?  Before I put it on ebay, I thought I would give the group a buzz first.Continue

Rescan of the Serviceman Bulletins Continues - Starting with January 1963

Started by Jason Edge in General Discussion. Last reply by Jason Edge on Saturday. 2 Replies

Way  back we had lower resolution JPG picture scans of the monthly Cadillac Serviceman Bulletins, and started rescanning the October and forward bulletins as higher 600dpi resolution searchable PDF…Continue

64 A/C Time Delay Switch

Started by Jeff Donaldson in General Discussion. Last reply by Russ Austin on Saturday. 3 Replies

Hi,I am looking for a replacement for my A/C time delay switch. If anyone has one I would like to buy it. I'm trying to repair what is left of my melted one. I foolishly took it apart without taking…Continue

Blog Posts

Authenticity Manual

Posted by Dennis P. DiBari on August 27, 2026 at 12:45pm 2 Comments

Hi Robert,

     I emailed you more pictures for the Authenticity Manual.

Dennis DiBari

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Videos

  • Add Videos
  • View All

© 2026   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service