I am in the process of removing the belt trim on the doors of my Fleetwood. I need to find the rear door window stop location so that i can remove screws. Help.
Also, I am replacing the vent window gears. Any suggestions before I take apart the mechanisms?.
Thank you.
Stephen Pechenik
Tags:
I forgot to mention that I am looking for a rust free inner fender for the passenger side front fender' Please let me know if anyone can fulfill this request.
Also, I have a 1964 passenger side front (rust free) fender That the seller assured me was for a 1963. I have no use for it. Let me know if anyone is interested. I can furnish you with photos.
Thank you
I have the inner fender for you, please send me an email; russ@thecadishack.com
Take the door panel off and the shop manual will point out the window stops.
I replied to your email.
Stephen, did you get my email? I will put the part away if I dont hear back from you.
Stephen, Is it a fender off a Fleetwood or a Sedan DeVille with the holes in it for the trim ?
Dear Chris,
The right front fender is from a non-Fleetwood model. There are no holes drilled for the "FLEETWOOD" script. I'll take some photos tomorrow and will send them to you.
Dear Chris,
I purchased the fender at the Hershey swap meet this past October. Somehow I forgot that it IS A FLEETWOOD FENDER. It is drilled for the Fleetwood lettering. That was my main reason for purchasing it for my 1963 Fleetwood.
I ran to my garage and took some photos. Although there is surface rust, the metal is thick and with the exception of a spot on the bottom behind the wheel and tire, is dent free. Let me know if you need more. I was in a hurry today. I have to return tomorrow to look at the parts I need to replace.
I await your advice.
Stephen Pechenik
Dear Chris,
I am having trouble navigating this website. I tried to respond to you before to inform you that the Fender is off a 64 Fleetwood. I took some photos but need your e-mail to send them. Send me an e-mail at SPechenik@gmail.com
Thanik you.
Started by Rick Yasenchack in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Monday. 20 Replies 0 Likes
I bought my 63 2-door convertible 62 series a few years back, previous owner said a new brake booster was just installed and that was why brake pedal was a rock. Did not know.Just had engine…Continue
Started by Mark Geertsma in Wanted to Buy. Last reply by Mark Geertsma Jun 19. 4 Replies 0 Likes
Looking to buy the -now seemingly obsolete (?)- NEAPCO 2-9303 double cardan CV joint repair kit for my 63 SdV.Anyone here who has one for sale or knows about an equivalent?Continue
Started by Joel A Campos in 1963/64 Cadillac Specific Discussion. Last reply by Joel A Campos Jun 18. 10 Replies 0 Likes
Hi All, I finished my 429 transplant (Still a 429) last fall and cannot get the car to run correctly. The carburetor, a stock Rochester 4gc was fully dismantled and cleaned and put back…Continue
Started by Mark Geertsma in General Discussion Jun 16. 0 Replies 0 Likes
I will soon be replacing the original type instrument panel light bulbs with LEDS for better visibility. Over the years, I have noticed that some people on this forum have figured out a way to…Continue
Tags: Illuminated, light, switch, bezel, mod
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
© 2026 Created by Jason Edge.
Powered by