I am in the process of removing the belt trim on the doors of my Fleetwood. I need to find the rear door window stop location so that i can remove screws. Help.
Also, I am replacing the vent window gears. Any suggestions before I take apart the mechanisms?.
Thank you.
Stephen Pechenik
Tags:
I forgot to mention that I am looking for a rust free inner fender for the passenger side front fender' Please let me know if anyone can fulfill this request.
Also, I have a 1964 passenger side front (rust free) fender That the seller assured me was for a 1963. I have no use for it. Let me know if anyone is interested. I can furnish you with photos.
Thank you
I have the inner fender for you, please send me an email; russ@thecadishack.com
Take the door panel off and the shop manual will point out the window stops.
I replied to your email.
Stephen, did you get my email? I will put the part away if I dont hear back from you.
Stephen, Is it a fender off a Fleetwood or a Sedan DeVille with the holes in it for the trim ?
Dear Chris,
The right front fender is from a non-Fleetwood model. There are no holes drilled for the "FLEETWOOD" script. I'll take some photos tomorrow and will send them to you.
Dear Chris,
I purchased the fender at the Hershey swap meet this past October. Somehow I forgot that it IS A FLEETWOOD FENDER. It is drilled for the Fleetwood lettering. That was my main reason for purchasing it for my 1963 Fleetwood.
I ran to my garage and took some photos. Although there is surface rust, the metal is thick and with the exception of a spot on the bottom behind the wheel and tire, is dent free. Let me know if you need more. I was in a hurry today. I have to return tomorrow to look at the parts I need to replace.
I await your advice.
Stephen Pechenik
Dear Chris,
I am having trouble navigating this website. I tried to respond to you before to inform you that the Fender is off a 64 Fleetwood. I took some photos but need your e-mail to send them. Send me an e-mail at SPechenik@gmail.com
Thanik you.
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Jacob Simmons on Thursday. 13 Replies 0 Likes
As is with my luck with this car (I still love it to pieces, just needs some TLC from neglect and not being driven) I’ve developed another issue. A small coolant leak has started from the Passenger…Continue
Started by Bill Wolf in General Discussion. Last reply by Dennis P. DiBari on Tuesday. 6 Replies 0 Likes
I am trying to replace the front wheel cylinders on my 63 SDV and can't figure out how to get a wrench on the bolts holding them on. Does the backing plate have to come off and if so, how? Thank you…Continue
Started by Anthony Vanacore in For Sale. Last reply by Anthony Vanacore May 6. 5 Replies 0 Likes
Hello,My father and I are restoring our 63 series 62 conv, we had the chrome bezels for the window/seat switches rechromed. During this process we also installed factory power door locks to the…Continue
Started by Jason Edge in General Discussion May 3. 0 Replies 0 Likes
As I was documenting the non-AC 63 Eldorado parts car I bought in a couple months ago, the solid panel dash end panels intrigued me and thought I would share a couple of pictures and thoughts. First,…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
© 2026 Created by Jason Edge.
Powered by