I am in the process of removing the belt trim on the doors of my Fleetwood.  I need to find the rear door window stop location so that i can remove screws. Help.

Also, I am replacing the vent window gears.  Any suggestions before I take apart the mechanisms?.

Thank you.

Stephen Pechenik

Views: 111

▶ Reply to This

Replies to This Discussion

I forgot to mention that I am looking for a rust free inner fender for the passenger side front fender'  Please let me know if anyone can fulfill this request.

Also, I have a 1964 passenger side front (rust free)  fender That the seller assured me was for a 1963.  I have no use for it.  Let me know if anyone is interested.  I can furnish you with photos.

Thank you

I have the inner fender for you, please send me an email; russ@thecadishack.com 

Take the door panel off and the shop manual will point out the window stops. 

I replied to your email. 

Stephen, did you get my email?  I will put the part away if I dont hear back from you. 

Stephen, Is it a fender off a Fleetwood or a Sedan DeVille with the holes in it for the trim ?

Dear Chris,

The right front fender is from a non-Fleetwood model.  There are no holes drilled for the "FLEETWOOD" script.  I'll take some photos tomorrow and will send them to you.

Dear Chris,

I purchased the fender at the Hershey swap meet this past October.  Somehow I forgot that it IS A FLEETWOOD FENDER.  It is drilled for the Fleetwood lettering.  That was my main reason for purchasing it for my 1963 Fleetwood. 

I ran to my garage and took some photos.  Although there is surface rust, the metal is thick and with the exception of a spot on the bottom behind the wheel and tire, is dent free. Let me know if you need more.  I was in a hurry today.  I have to return tomorrow to look at the parts I need to replace. 

I await your advice. 

Stephen Pechenik

Dear Chris,

I am having trouble navigating this website.  I tried to respond to you before to inform you that the Fender is off a 64 Fleetwood.  I took some photos but need your e-mail to send them.  Send me an e-mail at SPechenik@gmail.com

Thanik you.

RSS

Photos

  • Add Photos
  • View All

Forum

High idle speed

Started by Rick Yasenchack in General Discussion. Last reply by Dennis P. DiBari 5 hours ago. 1 Reply

My 1963 Cadillac with original carb, rebuilt professionally and finally adjusted to not stall at stops, but not idles to a point I can drive 25-30 mph with no gas pedal.Nearing the end of a nightmare…Continue

1964 Cadillac DeVille for Sale

Started by Jason Meyer in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 23 hours ago. 3 Replies

1964 deVille Convertible – $19,700 or Best Offer!Family-owned since new!…Continue

Power Steering Pump Hi Pressure Hose - Shorter Original vs Longer Aftermarket

Started by Jason Edge in Restoration Discussion. Last reply by Jason Edge on Saturday. 2 Replies

We had a discussion on the power steering pump to steering gear hi pressure hoses on Sunday's Zoom Meeting and I was explaining the original hose with the crimp in center was considerably shorter…Continue

Tags: high, pressure, power, steering, hose

1963 - 1964 NEW Molded 3/4" Heater Return Hose - $30

Started by Jason Edge in For Sale Oct 22. 0 Replies

One of our zoom meeting discussion topics from last Sunday was the new replacement for the 3/4" S-shaped heater return hose from heater core outlet nipple at firewall to hot water return pipe. The…Continue

Blog Posts

Authenticity Manual

Posted by Dennis P. DiBari on August 27, 2026 at 12:45pm 2 Comments

Hi Robert,

     I emailed you more pictures for the Authenticity Manual.

Dennis DiBari

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Videos

  • Add Videos
  • View All

© 2026   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service