I recently purchased a 1963 Coupe deVille. The transmission will only shift 1st to 3rd. I put the car on a lift and drained the pan and torus. I removed the shift valve body and coupling valve body, cleaned the pistons and bores, replaced the filter and fluid and adjusted the TV rod per spec. No change in the way it shifts. I have read that the aluminum cover on the fluid coupling is prone to cracking which will also cause the trouble I am having. I feel a rebuild is is in my future. Other than Gene's transmission in California, can anyone recommend a shop on the east coast? I live in Virginia Beach, VA. John. 

Facebook Facebook

Views: 277

Reply to This

Replies to This Discussion

Hey John , go to the Cadillac / Lasalle  Club site and post your question . Im sure somebody can help you find a Trans guy by your area, Good Luck. Ray 

John, did you happen to find any other shops or what was wrong? My transmission is doing the same.

I called Gene and talked to him for an hour. He is near genius but just a little more than I wanted to pay.

Josh, I live in Virginia Beach Virginia and finally found a shop in my area to overhaul my transmission The shop is CarLife Transmissions in Norfolk Virginia. The owners name is Fred Kent and he is very knowledgeable. Before I could tell him what steps I had taken to correct the problem he told me exactly what was wrong. I had already researched the problem and knew that the secondary fluid coupling was leaking. The only way to correct it is to pull the tranny. I dropped off my car at the shop 2 weeks ago and and am expecting it back any day now. He quoted me $3980 (must be the going rate for a Jetaway) for the overhaul and had every part needed for the rebuild. That price included removal and installation. Yes, I know it is quite a bit but at least I know it will be done right.

Thanks for the info John. BTW, I love VA Beach...I was stationed at Langley AFB for 4 years. That's my old stomping ground!!

RSS

Photos

  • Add Photos
  • View All

Forum

Replace Choke Tube or Install Electric Choke?

Started by Michael Stinson in 1963/64 Cadillac Specific Discussion. Last reply by Patrick Westphal yesterday. 4 Replies

My mechanic has sourced a choke housing and new internals.  As you might expect, the choke tube is damaged and or clogged.  My options are to either replace the choke tube, or my mechanic recommends…Continue

Tags: Electric Choke, Choke Tube

Correct whitewalls

Started by Richard Stanley in 1963/64 Cadillac Specific Discussion yesterday. 0 Replies

 I just replaced my tires from Diamondback (I had bad results in the past from Coker).  It was the second time, due to the age of the tires.  About 18 years ago Diamondback made custom whitewalls…Continue

Tags: width, whitewall, correct

Dino Radiator Leak - Time to Recore!

Started by Jason Edge in General Discussion. Last reply by Jason Edge on Thursday. 35 Replies

I had brought up the topic of radiator leaks as a discussion topic for our Chapter Zoom meet-up this past Sunday and thought I would share on our website for everyone and probably do a more formal…Continue

1963 390 upper heater core hose

Started by Kenneth M Karrer in General Discussion. Last reply by Bill Wolf on Wednesday. 5 Replies

Hello,      My 63 convertible is a low mileage (34k) original car so while I've done some basics, like replacing radiator hoses, belts, and a few gaskets; I've been trying to leave things as is as…Continue

Blog Posts

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service