63/64 Convertible interior quarter rub guard
Wanted: interior rub guard for a convertible. Attaches to the rear-most edge of the quarter trim panel. It's a small stainless piece with one screw attaching it. See photo. Need the right (pass) side.
Replies to This Discussion
-
Permalink Reply by Michael Forte on
-
Bumping this. The last piece I need to complete my interior restoration. Attaches to the rear-most edge of the rear quarter trim panel. It's a small stainless piece with one screw attaching it. I only need the passenger side but will buy both if you have them. I've seen them on Old's and Pontiac convertibles as well. Should be the same for 63 and 64.
-
Permalink Reply by 3ft7bqmb7dryo on
-
Have you contacted willigton Cadillac? He has a 63 convert parts car.
-
-
These are either extremely rare or I just don't know where to look. But....After more than 5 years of looking I finally found a set from a 1963 Pontiac P8 on ebay and scooped them up.
-
-
It really was a happy moment. I can now say that my interior restoration is 100% complete!. Done!
Now, on to restoring the engine compartment....
-
Permalink Reply by Jason Edge on
-
Congrats on the find!
Photos
Members
Forum
Original ‘64 Cruise Installed.
Started by Michael Vogler in General Discussion. Last reply by Dennis P. DiBari 2 hours ago. 1 Reply 0 Likes
Finally got the original factory cruise control in my ‘64 Deville fully installed. It works! (After considerable effort and expense 😳)Thinking about installing the original auto-dim headlights next…Continue
A Big Welcome to the 63/64 Cadillac Chapter to my Brother Randy
Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by Randall (Randy) Edge on Wednesday. 2 Replies 0 Likes
My brother Randall (Randy) Edge has been helping me off and on for many years with traveling to pick up parts cars all over the east cost, to almost anything and everything I need help with around…Continue
Frost plugs
Started by Sammy in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari May 23. 5 Replies 0 Likes
Summer is coming, and now the next frost plug is leaking.Has anyone ever done these?Which kind of plugs did you use and where to buy them?Read a lot about "adjustable" plugs and sealants - but not…Continue
Trivia Question #37: A Jiggy Car Frame Tool!
Started by Jason Edge in Trivia May 22. 0 Replies 0 Likes
Yesterday, after struggling with other tools to disassemble a part using some not quite right tools, I decided to use the car frame as a "jig" to hold the part in place while I removed the other…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
New old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
Videos
© 2026 Created by Jason Edge.
Powered by
