Hi all. my 63 has developed squeaks and creaks recently. I took a look at the ball joints and associated rubber parts, and they do look a bit worn. I have replaced shocks in last year or so. When I bounce the front ends, you can hear the squeak and "feel" the squeak when you put your hand on the upper control arm. I put some oil on them to try and settle it down for temporary relief. I feel like Uncle Buck riding around with the squeek at stop lights!! the prior owners that had the car since orig purchase kept meticulous records and I cant find any efforts to replace them. That would mean they have 175k miles on them.
So I was wondering if it would be wise to replace the control arms with the newer configurations or just replace the ball joints and associated rubbers. Would the newer engineered arms be worth it ride wise? and if so, is any cutting or refitting required. and further, is there any kit that anyone could recommend??
Tags:
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Michael Vogler yesterday. 15 Replies 0 Likes
Late in the evenings, I wonder about things I will probably never do as I am not that crazy. However, I know someone out there has tried it or wanted it bad enough they have done it. My 64 Fltwd did…Continue
Started by Jason Edge in General Discussion on Thursday. 0 Replies 0 Likes
If on a desktop or laptop, (or in desktop view mode on a mobile device) check out the header and you will see Steven Schneefuss' 1963 Coupe de Ville and Larry Rees' 1964 de Ville Convertible…Continue
Started by Jason Edge in General Discussion on Monday. 0 Replies 0 Likes
I received the email below and did not remember a raised roof 75 series but thought I would post here. Anyone know of or ever hear of this car?"I am a volunteer at Hillwood Museum and Gardens, the…Continue
Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Patrick Westphal Jul 25. 2 Replies 0 Likes
So I have been having problems with my brake lights. At first I thought it was both sides and turns out it is only the drivers side. Also, I thought the blinker worked and it didn’t and turned out…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
© 2025 Created by Jason Edge.
Powered by