DIDGAKNOWTHAT? - Notches for Holding License Plate Door Open when "Filling Up!"
I casually mentioned during our Zoom meeting Sunday that there are notches for using the gas cap to hold the license plate door open while filling up and a couple of members indicated they did not know that so I thought it was worth posting here.
I have a couple of other DIDGAKNOWTHAT items, and might make this into another recurring topic.
So, here is DGKT #1:
Gas Tank Filler Cap for Holding License Plate Door Open:
- simply open the license plate - filler door and wedge cap in between arrows as seen below. This is my 64, but the same thing for 63 with notches in same general area.
Wedging cap in notches makes filling up 1000x easier!
Replies to This Discussion
-
Permalink Reply by Dennis P. DiBari on
-
Hi Jason,
Thank you for answering my question - never knew about this (along with other things I'm sure). I appreciate your feedback!
Dennis DiBari
-
Permalink Reply by Matti Roth on
-
Thanks Jason!
Actually this is mentioned in Owner’s Manual page 37 but there is no photo.
I always open the cap with right hand and try to fit that to RIGHT SIDE vertically between the door and the chrome frame but usually it does not work.
-
Permalink Reply by Jason Edge on
-
"Actually this is mentioned in Owner’s Manual page 37 but there is no photo." While it is mentioned in the 1964 owners manual it is not in the 1963 manual. Regardless there is a large % of questions I get asked day to day that are right there in your owners manual.
Members
Forum
Coolant Overflow Bottle / Reservoir for 64 Cadillac Eldorado
Started by Michael Stinson in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf 2 hours ago. 9 Replies 0 Likes
Greetings Everyone. I read a discussion thread about "radiator and related", covering coolant overflow. Has anyone fitted an overflow reservoir / bottle to their 64 Cadillac? Is there if a…Continue
1963 Eldorado Trim complete set
Started by Robert Dye in For Sale 11 hours ago. 0 Replies 0 Likes
This is complete set of nice 63 Eldorado trim. Would like to sell as complete set but have duplicates of most of the moldings that can be sold separately. I am attaching a few pictures but you can…Continue
Convertible bumper jack
Started by Alan Clark in 1963/64 Cadillac Specific Discussion. Last reply by Alan Clark on Monday. 4 Replies 0 Likes
My car lacks the mechanism or spring needed to hold the jack in the storage slot on the right side of the trunk. Anyone have a picture of the item I should find?Continue
Wanted Cadillac Lasalle 2 inch Windshield Decal Sticker
Started by Doug Scarrow in Wanted to Buy. Last reply by Dennis P. DiBari on Saturday. 3 Replies 0 Likes
for close to 20 years I have had a lovely Club Decal on my windshield now I wish to replace the windshield and would love to buy a decal if any one has one available See attached photosContinue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Events
Videos
© 2025 Created by Jason Edge.
Powered by
