18 years back and many miles since, I replaced the Factory original Mode Actuator and heater core. Well, a couple of weeks back the replacement Mode Actuator failed. I ordered a new Actuator from Old Air Products. I figured even though the Heater core was still good, not leaking, I might as well replace it while I had everything apart. I ordered the new heater core from Rock Auto. I have the Heater Box assembled but I haven't installed it under the dash, yet. For anyone interested, I uploaded to my page, some pictures of the Heater Box, etc. I was able to remove the Heater Box from under the dash without removing the blower housing from the engine bay firewall or removing the hood hinge, as the shop manual lists to do.

Views: 178

Reply to This

Replies to This Discussion

You can JB weld that resistor together.   To fix the vacuum valve, drill the rivet head off and sand the 2 sealing surfaces flat again. Use a mirror with fine sandpaper. The mirror will give you a flat surface.

You will need to drill and tap the rivet post for a machine screw. Use Loctite so the screw doesn't back out. 

I have extra valves if you screw it up. 

Russ, Thanks for the tip!

Forgot to mention that you will need to use high temp vacuum grease between the 2 halves.

Russ, thanks for the follow up on the required lubricant. 

RSS

Photos

  • Add Photos
  • View All

Forum

Current 1963/64 Cadillac Listings on eBay

Started by Jason Edge in For Sale. Last reply by Jason Edge 35 minutes ago. 1 Reply

To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue

Tags: ebay

spark plugs

Started by Ron Perry in 1963/64 Cadillac Specific Discussion. Last reply by Ron Perry 16 hours ago. 6 Replies

Gentlemen   I have a 1964 Sedan De Ville with 20 thousand original miles. I am going to replace the spark plugs. What plug would you recommend? I only drive the car a few hundred miles a year and the…Continue

Classic Cadillac Parts For Sale - Misc Items

Started by Jason Edge in For Sale. Last reply by Jason Edge 16 hours ago. 170 Replies

I have posted a few Misc items over on my Classic Cadillac Parts Facebook page at…Continue

Tags: classic cadillac parts, classiccadillacparts

Blog Posts

Looking for 63 Convertible / Coupe rear side trim

Posted by Gene McIlroy on January 24, 2020 at 12:18pm 0 Comments

Want to find a good straight dent free rear side trim for my 1963 Convertible.  I have both sides but they do not match.  Wanting to get them to match.  I am attaching a photo of the two trim sided that I have really wanting the squared off trim if I can get it.  Let's see what you have,…

Continue

Road Trip

Posted by Ray Schick on January 21, 2020 at 9:00pm 7 Comments

Got a little cabin fever this morning,decided to take a road trip to Hickory Corners Michigan, The Gilmore Museum. It’s about 2 1/2 hours from my home . Place is awesome,I was really impressed.

9A648CFF-E965-4CE0-8E91-8E194AC70DED.jpeg…



Continue

1964 429 Aluminum Front Cover For Sale!

Posted by Jeff Kinzler on January 12, 2020 at 3:30pm 1 Comment

  • I wound up with an extra front cover for my '64 and offering it for sale.

Purchased from a knowledgable part supplier with thorough hands-on knowledge of 63-64 Cadillac engines, who checked the part before sending it to me. The oil pump driven gearSee S bore and the pressure relief piston bore are both .002 over and within the .005…

Continue

Looking for the Rochester Choke Tube ...

Posted by Mack on January 10, 2020 at 1:14am 3 Comments

37E244B6-71C7-4857-8D50-1BD8C48077A4.jpeg

Looking to buy the choke tube for my Rochester... anybody have one for Sale???

Events

Videos

  • Add Videos
  • View All

© 2020   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service