Wayne Morris's Discussions (33)

Discussions Replied To (25) Replies Latest Activity

"Yesterday I installed the windshield washer pump kit, I primed it and it worked! I d…"

Wayne Morris replied Jan 15 to Windshield washer pump inoperative

16 Jan 15
Reply by Dennis P. DiBari

"Once I get the rebuild kit installed, I'll let you know how I made out. Wayne"

Wayne Morris replied Jan 11 to Windshield washer pump inoperative

16 Jan 15
Reply by Dennis P. DiBari

"Already have checked the fluid. It was good clean fluid and the screen was clear. Th…"

Wayne Morris replied Jan 10 to Windshield washer pump inoperative

16 Jan 15
Reply by Dennis P. DiBari

"I tried priming the pump but no luck, I got a little fluid into the pump body but it…"

Wayne Morris replied Jan 10 to Windshield washer pump inoperative

16 Jan 15
Reply by Dennis P. DiBari

"I have ordered  a windshield washer pump rebuild kit from Caddy Daddy and should rec…"

Wayne Morris replied Jan 10 to Windshield washer pump inoperative

16 Jan 15
Reply by Dennis P. DiBari

"I did use a smaller studded fastener on one door but it did not seem as secure when…"

Wayne Morris replied Jan 7 to Body side molding install help needed

10 Jan 7
Reply by Jason Edge

"I could could not get the proper clips for the door side moldings. I got some used b…"

Wayne Morris replied Jan 7 to Body side molding install help needed

10 Jan 7
Reply by Jason Edge

"Thank you once again Wayne"

Wayne Morris replied Dec 14, 2024 to Body side molding install help needed

10 Jan 7
Reply by Jason Edge

"Jason, thank you for clarifying how the clips are located and how they work. Very he…"

Wayne Morris replied Dec 14, 2024 to Body side molding install help needed

10 Jan 7
Reply by Jason Edge

"are these clips used for the center three holes of the door molding/"

Wayne Morris replied Dec 12, 2024 to Fender Trim Removal

6 Dec 12, 2024
Reply by Jason Edge

RSS

Photos

  • Add Photos
  • View All

Forum

Add cruise control/Aftermarket Cruise control

Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Michael Vogler 4 hours ago. 13 Replies

Late in the evenings, I wonder about things I will probably never do as I am not that crazy. However, I know someone out there has tried it or wanted it bad enough they have done it. My 64 Fltwd did…Continue

Anyone Aware of a Raised Roof 75 Series?

Started by Jason Edge in General Discussion yesterday. 0 Replies

I received the email below and did not remember a raised roof 75 series but thought I would post here. Anyone know of or ever hear of this car?"I am a volunteer at Hillwood Museum and Gardens, the…Continue

Gump(Pat Westphal) you’re a gosh darn genius!

Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Patrick Westphal on Friday. 2 Replies

So I have been having problems with my brake lights. At first I thought it was both sides and turns out it is only the drivers side. Also, I thought the blinker worked and it didn’t and turned out…Continue

Front grill

Started by Phillip Hill in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari Jul 22. 11 Replies

Hi everyone im currently restoring my my front grill due to some previous clown painting it with silver frost paint and doing a dodgy job I would like to know what parts of the grill are anodised.it…Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service