All,

after over 18 months of headaches I finally can share a happy update! 
I have my 63 Eldorado back and it is actually driving!!!

There are a couple of things that I knew will have to get done before I can take it on longer trips but the engine is running smoothly again. I take every little win at this point. 
Thank you to everyone for the help and advice you gave me - without you I would have given up a long time ago. 

There is a quick question I have and I hope you can help again:

The mechanic changed the temperature gauge sensor on the engine and got one from NAPA that was supposed to work but he said it does not have the correct Ohm. The temp gauge now goes directly to hot when starting the engine - he said he manually checked the temp after driving and it is not overheating which is good. 
Anyone ever replaced that and has a tip/ part number for me? 

Thanks again

Daniela

Facebook Facebook

Views: 130

Reply to This

Replies to This Discussion

Daniela, Congrats on getting the car back. I know it is a great feeling to be able to drive it again and I look forward to seeing you and the Caddy at one of our future meet-ups.
The temp sending units sold over the counter these days (and for the last few years) are crap and mis-calibrated sending the incorrect resistance (ohms) to the temp unit.  Good used ones have been in super high demand the last few years and I usually stay out of them, but do have a known good one that I pulled from the last running car. I sell these for $20, which drops to $15 for you with 25% Chapter discount and can ship for $10 for a final total of $25. If interested in a good used one shoot me a PayPal to jasonedge@nc.rr.com and I will get this one on the way.  Jason. 

Hi Jason,
There are still a couple of small things to get done but I am also looking forward to finally show the car to everyone.
Also, I just send you the money via PayPal. Thanks so much for the quick reply.
Daniela

Daniela, The temp sending unit is packed and will ship out Priority today. thanks, Jason.

Thank you so much!
Yes, I got the first honks, waves and a gas station chat yesterday.
For me the most fun are the surprised faces when they realize it is a woman driving.

Daniela, so glad to hear that you've got your land yacht rollin again!  Sometimes its a long road get these rigs roadworthy, but the enjoyment is so rewarding! 

Tom B

It is truly a yacht but it is back on the road. There still are a couple of little things to get done but at least I am done with this chapter. 

Daniela,

Congratulations on getting your ride back on the road!  Please post pics.

RSS

Photos

  • Add Photos
  • View All

Forum

Replace Choke Tube or Install Electric Choke?

Started by Michael Stinson in 1963/64 Cadillac Specific Discussion. Last reply by CHRIS CARLSON yesterday. 8 Replies

My mechanic has sourced a choke housing and new internals.  As you might expect, the choke tube is damaged and or clogged.  My options are to either replace the choke tube, or my mechanic recommends…Continue

Tags: Electric Choke, Choke Tube

TH400 Dipstick Tube Seal

Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Michael Buonaccorso yesterday. 10 Replies

In my “rebuild” of the transmission, I ordered a dipstick tube seal. However, I’m not sure if the right one came or how to best install the seal. I am wondering if anyone has replaced this seal OR…Continue

window regulators

Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Frank Murch on Saturday. 2 Replies

For years my winds have seemed to be looser and less accurate than most modern windows.  I am thinking the soft parts are worn.  Has anybody gone through thier window regulators and felts to restore…Continue

Correct whitewalls

Started by Richard Stanley in 1963/64 Cadillac Specific Discussion on Thursday. 0 Replies

 I just replaced my tires from Diamondback (I had bad results in the past from Coker).  It was the second time, due to the age of the tires.  About 18 years ago Diamondback made custom whitewalls…Continue

Tags: width, whitewall, correct

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service