I am trying to get my 1963 Sedan Deville Park Avenue road ready. It is almost there. The last owner must have purchased the car without keys as he removed the pins from the ignition lock tumbler and the glovebox lock tumbler. Due to the fact that my local locksmith lacked original key blanks, I purchased octagonal head key blanks stamped "A" and un-stamped round head key blanks all of which contained the Cadillac V and crest. displayed on one side of the key head.
According to my recently purchased owners' manual, the round headed key is for the trunk and glove box while the octagonal key should be for the ignition and doors. For some reason the round headed key fits into all of the locks while the octagonal key fits in none.
For some silly reason, it is important to me to put the key problem right. However, to do so, I need different octagonal head keys. Where can I find some?
Tags:
That is strange that the octagonal head key doesn't fit. I got my key blanks at USA Parts Supply
https://www.usapartssupply.com/cadillac.php
The blanks are on page 23 of the catalog
https://www.usapartssupply.com/uploads/USA%20PARTS%201949%20-1970%2...
The round head key has GM on one side & the Cadillac V and crest on the other but the octagonal head key hays GM on both sides.
Kurt, When you say doesn't fit do you mean it literally will not insert into the lock cylinder or just doesn't unlock the lock? It looks like the correct shape.
Travis J. Hensley Online
Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Patrick Westphal on Friday. 2 Replies 0 Likes
So I have been having problems with my brake lights. At first I thought it was both sides and turns out it is only the drivers side. Also, I thought the blinker worked and it didn’t and turned out…Continue
Started by Phillip Hill in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Tuesday. 11 Replies 0 Likes
Hi everyone im currently restoring my my front grill due to some previous clown painting it with silver frost paint and doing a dodgy job I would like to know what parts of the grill are anodised.it…Continue
Started by Nile Bolen in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari Jul 21. 4 Replies 0 Likes
I checked the Help page and did a search on the site but didn't see any subjects on steering play/slack. Since I had someone complete a front end rebuild (Kanter kit, all the control arm bushings,…Continue
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Michael Vogler Jul 21. 12 Replies 0 Likes
Late in the evenings, I wonder about things I will probably never do as I am not that crazy. However, I know someone out there has tried it or wanted it bad enough they have done it. My 64 Fltwd did…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
© 2025 Created by Jason Edge.
Powered by