Hi all,, i fianlly got appointment to get wheels aligned after the center link replacement. Iread somewhere, I dont think here though, that the settings set out in the book for allignment may be diffent for biased and radial tires. If that is true, adn i have no idea if it is,, what if any addl adjustment should be set in to accomodate the particular tire,
Thanks
Tags:
Specs are on our Help Page at the following link:
- Alignment: Front-End Alignment Specs for Bias Ply and Radials
Thanks, i passed it on to the alignment man
I got wheels aligned this morning. Little to no difference in wheel play
Attached. Video at rest
Video slow. Notice slop
At highway speed
You can see the movement w no steering affect is about the same, 5 or so inchs at rest and at sp.
So given this after center and outer links chged with alignment, what woukd be next step, i kno this is not correct steering. Before i replaced thecsteering gear for bad leak, it did same thing. So can it be looseness or worn part in column inside the cabin, not below the firewall. I hv a 73 eldo, and as has been mentioned, its night and day in steering ease. So i think i know that feeling yall often speak of driving w one finger
Any thoughts
Are you sure the rag joint is good? Have someone crank the steering wheel (engine off) while you observe the rag joint. You should see both sides that are joined by the rubber coupling move simultaneously if the coupling is in good shape.
A decent front end shop should be able to run it up on the rack and give you some ideas. From what I remember you have only replaced a couple of parts... maybe the inner tie rods, and control link? You also have the outers, the idler arm, steering gear to steering column coupler (rag joint) as Kurt mentioned. The bottom line is if you have a chain with several weak links and only replaced a couple of the weak links you still have a weak chain.
the rag joint was fine,,
do we have saginaw steering gears in our year cars or is it another make??
These are Saginaw gears.
Your steering gear is shot. My car had the same problem when I bought it. B.A. Baracus steering, as we call it.
After the steering gear was replaced it was completely tight and straight as an arrow.
Tthere is this guyvdownnstreet from me. Hecwirks on everything from jihn deerevtractors to snow machines. Kinda freelance, we hv become friends overvlast couple months. Well, i asked him whatbhe thought, showed him the videos, he said gear woukd be first thing he would try, so today, we undid that bolt and nut on top of gear, gave it a touch over 1/4 turn, tightened it all down and it is a huge difference, all those micro steering adjustments to keep car strait are basically gone. The wheels actually respond! But quickly, not after a 6 inch movement were nothing happened. So much nicer to drive. Hopefully it will hold, Mark, this is a replacement for another one that was bad, but it was leaking a lot of ps fluid.
While there, he got yo looking around engine, asked if i had truble going up hills or the transmission not downshifting. I said yes, i hv to really hit it to get it to shift. He said my kickdown rod was not set right. So he gave me the theory behind it, set it differently, and makes big diff there as well. It quckly gets tona lower gearvto climb the hill. So, i learmed a little, got a little better ride out of it.
Thanks for zll the help
Hey Tony,
Yes,, car is fine now. It really made a difference. I can drive with my left hand on my knee and just work the wheel with my finger, as you have said many times. So much nicer to drive now, none of the micro adjustments to stop from over steer,
thanks for the input
Started by Mike Travers in 1963/64 Cadillac Specific Discussion. Last reply by Matti Roth on Tuesday. 1 Reply 0 Likes
My 61 year old radiator sprung a leak (actually a few leaks). What are you guys using as replacements? Are you replacing with copper or aluminum? How many rows are you running in the radiator? How's…Continue
Started by Jeff Donaldson in Wanted to Buy on Monday. 0 Replies 0 Likes
Hi,I need one T-3 low beam headlight if anyone has a spare they would like to sell.CheersJeffContinue
Started by Doug Scarrow in For Sale on Sunday. 0 Replies 0 Likes
just listed https://www.ebay.com/itm/266787800087Correct complete front unit coupling fits 1958 thru 1964 Cadillacs Hydramatic transmission The…Continue
Started by Doug Scarrow in For Sale on Saturday. 0 Replies 0 Likes
Just listed. https://www.ebay.com/itm/266786607755Continue
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 0 Likes
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 0 Likes
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment 0 Likes
My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns.
There is a restoration service called The Horn Works who my son…
Continue© 2024 Created by Jason Edge. Powered by