Cornering Light Socket
I'm currently restoring this cornering light housing. Is the socket pressed in or is there a way to remove it without destroying and replacing it?
Replies to This Discussion
-
Permalink Reply by 3ft7bqmb7dryo on
-
The lip is rolled over to swedge the socket in place.
-
Permalink Reply by Chris Codd on
-
Thanks for confirming that, Russ. I'll try and restore it with the socket still in. I'll be testing out some chrome paint and we'll see how it all turns out. In the meantime, I sanded it down to bare metal.
-
-
To resecure the socket I use a deep well socket to set the socket into. It supports the back of the housing. Then a punch to tap the rolled lip back into the housing.
Photos
Members
Forum
WTB: 1963 Double Cardan CV Ball Socket Repair Kit (NEAPCO 2-9303)
Started by Mark Geertsma in Wanted to Buy. Last reply by Mark Geertsma 2 hours ago. 2 Replies 0 Likes
Looking to buy the -now seemingly obsolete (?)- NEAPCO 2-9303 double cardan CV joint repair kit for my 63 SdV.Anyone here who has one for sale or knows about an equivalent?Continue
VAPOR LOCK?
Started by Joel A Campos in 1963/64 Cadillac Specific Discussion. Last reply by Joel A Campos 4 hours ago. 10 Replies 0 Likes
Hi All, I finished my 429 transplant (Still a 429) last fall and cannot get the car to run correctly. The carburetor, a stock Rochester 4gc was fully dismantled and cleaned and put back…Continue
Brake Booster not enough compression
Started by Rick Yasenchack in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin 21 hours ago. 17 Replies 0 Likes
I bought my 63 2-door convertible 62 series a few years back, previous owner said a new brake booster was just installed and that was why brake pedal was a rock. Did not know.Just had engine…Continue
Illuminated light switch bezel
Started by Mark Geertsma in General Discussion on Tuesday. 0 Replies 0 Likes
I will soon be replacing the original type instrument panel light bulbs with LEDS for better visibility. Over the years, I have noticed that some people on this forum have figured out a way to…Continue
Tags: Illuminated, light, switch, bezel, mod
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
New old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
Videos
© 2026 Created by Jason Edge.
Powered by
