Hi I am new to this Discussion  I currently purchasing a 64 Deville convertible and It has bias ply tires that are 15 year old  they have L-78-15 tires and would like to put on radials . Question  what is a good cross to radial tire and is l-78-15 the original tire size. Thanks  Mark

Facebook Facebook

Views: 852

Reply to This

Replies to This Discussion

The 235/75R15 is a good match.  Look into the Ironman tires for a white wall. 

Hi Russ I am looking at the 235 75R15 in Ironman are those the RB12 after the tire size Thanks

Hey Russ   what size white wall do you recommend and what was the stock width  Thanks

I went with the ironmans, they ride well and feel good on the car. the width wall width is 1 inch. Not sure what the stock width is. 

Original white wall width and distance from rim across the 3 tire suppliers is discussed in our Tires: Original Tires and Rims (Wheels) used on 1963 & 1964 Cad...   Scroll down and you will see  chart. Help Page.

Hi Russ looked at the Ironman Tires quite a few people are complaining the white wall turns brown  after a year have you had this issue

Thank you Tony, So you agree with Russ Austin the 235 75 R15 ? Have you tried stick on weights for mag wheels?

I am surprised you don't run Bias Ply on your Eldo. I am strongly considering it for my 64 Fleetwood. By all accounts I have heard, the driving feel is better than radial. Bias Ply being softer. I am not a speed runner and most of the area around here is flat- so no large concerns there. The occasional jaunt on the freeway is the fastest I ever make it. 

Logan

Thank you

I recently changed out my Eldo's  bias ply tires for a set of radials, so I could drive the car and enjoy it a lot more.

I bought Coker's Firestone Steel Belted 721 LR78-15 "bias-look" radials with a very close to correct Cadillac 3/4" whitewall stripe. Matches the original spare in my car.  Overall diameter 28.78".

Price was $334.00 each. 

You can special-order tires similar to these from Diamondback (not sure Coker does this) with the sidewalls "blank", meaning there's no tire brand showing, only a size.  Makes the tires look classier to me.  

Mark. I just purchased a set of 820-15 Radial Damond back tires with a one inch whitewall they look  very similar to the original tires  which where 820-15 bias ply with a one inch white wall. $304.00 each.  The original spare tire in the trunk was a 820-15 US Royal with a one inch white wall. I should have them in two weeks.

Not sure, but it i a white wall tire. I like them on my car.

RSS

Photos

  • Add Photos
  • View All

Forum

where to find 1963 Cadillac Plastic Door Pin Anchors

Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 4 hours ago. 2 Replies

Hi allwhere can I find these - 1963 Cadillac Plastic Door Pin Anchors. Mine are from1963 and a little tiredThanksContinue

Rear Main Seal Oil Leak Fix with Bearing Cap Modification

Started by Kurt in 1963/64 Cadillac Specific Discussion. Last reply by Matti Roth yesterday. 15 Replies

Many owners have reported oil leaks at the rear main seal even after replacing the seal, myself included. Recently Tony Lentini found a Serviceman bulletin published in February 1965 which details a…Continue

Future of CLC Judging

Started by Jason Edge in Restoration Discussion. Last reply by Jason Edge on Thursday. 6 Replies

First, A Big Thank You to CLC Chief Judge Bill Anderson for taking on this daunting task of overhauling the CLC judging system.  The old system was very good, however, I believe what Bill and the…Continue

front seat crest

Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Frank Murch on Tuesday. 3 Replies

Original seats had a crest on the center arm rest.  Does anybody know where I could embose a crest in new material for a reupolstry?Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service