As is with my luck with this car (I still love it to pieces, just needs some TLC from neglect and not being driven) I’ve developed another issue.
A small coolant leak has started from the Passenger Side footwell. This happened once about a year ago, hasn’t happened since. It’s now happened again, much worse this time, after I did a major flush of the coolant system about 2 months ago.
I am guessing this is coming from the heater core which sounds like no fun to change or even try to inspect.
The weather here in central IL is cooling (for now) and I won’t need the AC. Heat is marginal as it gets put away in about November anyway.
What are the best suggestions to reversibly and temporarily block off the heater core until I do a major overhaul of the Comfort Control in the future?
Picture of reference of where the leak is at.
Tags:
Your neighborhood part store will stock a by-pass kit. I will try to post a picture of an example. Alternatively, you can buy hose caps for the heater hose outlets at the front of the engine. hth
Yep! The carpet is like new. So that’s a bummer. It was pretty soaked. I’ve got a carpet cleaner and there baking soda soaking up the worse of if now.
Have any experience with Alumaseal? Not crazy about the idea…. I’ve heard they plug stuff up pretty bad.
You can by-pass the heater core in 20 minutes or less. I’ve never been a fan of stop leak additives. I only used such products in desperation on beaters when I was young and impoverished.
Upon thinking on this issue for the past week or so-I think the best resolution for now to cap and bypass the heater core.
I do want heat eventually, however, with a our wedding coming up and the 64 Fleetwood being the 3rd Star of the Day, I can dig into that right now.
Correct me if I am wrong, but the photo posted below, those are the inlet/outlet lines from the heater core, right? All I should need to do is find the correct fittings and a length of hose and loop them together?
I want to be sure that I can return the system back to original functioning condition when the time comes, so making sure I have everything correct is crutial.
Thanks all!
Logan
Ignore the center arrow, that one was added by mistake
Thats a good tip! Thank you.
Logan
Kenneth Barton Online
Travis J. Hensley Online
Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Tony Prichard 7 hours ago. 4 Replies 0 Likes
I have finished replacing all the rear suspension and am at the last item, which is bleeding the rear brakes. I am using the Jason Edge vacuum pump method and all went well with the rear passenger…Continue
Started by Bobby Brown in General Discussion. Last reply by Tony Prichard 7 hours ago. 7 Replies 0 Likes
My reservoir is a little low. Any recommendations on my purchase of refill fluid? There are likely new fluids and I’d like to buy the right product. Thanks. Continue
Started by Mark Geertsma in 1963/64 Cadillac Specific Discussion. Last reply by Kenneth Barton yesterday. 2 Replies 0 Likes
Hi all,Again I have issues with my AC system. Had it refilled recently but within a few days the system was empty again. The AC mechanic added tracer fluid to check for leaks, but there are no…Continue
Tags: 1963, core, evaporator, AC
Started by Kevin Robles in 1963/64 Cadillac Specific Discussion. Last reply by Kevin Robles on Wednesday. 3 Replies 0 Likes
does anyone out there have any experience with seat foam replacement on a 63/64 Cadillac. I had my seats reupolstered many years ago in original leather/fabric and they still look great, but the…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
July 20, 2025 from 8pm to 9:30pm – Zoom
0 Comments 0 Likes
© 2025 Created by Jason Edge.
Powered by