Coolant leak above Passenger Feet
As is with my luck with this car (I still love it to pieces, just needs some TLC from neglect and not being driven) I’ve developed another issue.
A small coolant leak has started from the Passenger Side footwell. This happened once about a year ago, hasn’t happened since. It’s now happened again, much worse this time, after I did a major flush of the coolant system about 2 months ago.
I am guessing this is coming from the heater core which sounds like no fun to change or even try to inspect.
The weather here in central IL is cooling (for now) and I won’t need the AC. Heat is marginal as it gets put away in about November anyway.
What are the best suggestions to reversibly and temporarily block off the heater core until I do a major overhaul of the Comfort Control in the future?
Picture of reference of where the leak is at.
Replies to This Discussion
-
Permalink Reply by Chris McBride on
-
Your neighborhood part store will stock a by-pass kit. I will try to post a picture of an example. Alternatively, you can buy hose caps for the heater hose outlets at the front of the engine. hth
-
Permalink Reply by Logan Robb on
-
Yep! The carpet is like new. So that’s a bummer. It was pretty soaked. I’ve got a carpet cleaner and there baking soda soaking up the worse of if now.
Have any experience with Alumaseal? Not crazy about the idea…. I’ve heard they plug stuff up pretty bad.
-
-
You can by-pass the heater core in 20 minutes or less. I’ve never been a fan of stop leak additives. I only used such products in desperation on beaters when I was young and impoverished.
-
-
Upon thinking on this issue for the past week or so-I think the best resolution for now to cap and bypass the heater core.
I do want heat eventually, however, with a our wedding coming up and the 64 Fleetwood being the 3rd Star of the Day, I can dig into that right now.
Correct me if I am wrong, but the photo posted below, those are the inlet/outlet lines from the heater core, right? All I should need to do is find the correct fittings and a length of hose and loop them together?
I want to be sure that I can return the system back to original functioning condition when the time comes, so making sure I have everything correct is crutial.
Thanks all!
Logan
-
-
-
-
Ignore the center arrow, that one was added by mistake
-
-
Thats a good tip! Thank you.
Logan
Members
Forum
Front door handle lights not working
Started by Bill Wolf in 1963/64 Cadillac Specific Discussion. Last reply by Kurt 21 hours ago. 3 Replies 0 Likes
My front door handle lights would not go on when I opened the doors. Bulbs were good and had power to them. Was not getting a ground. The door switch was corroded and wasn't making contact when the…Continue
4,442 Pounds of Cadillac Metal Cadmium Plated! - Pick-Up 12th batch Thursday
Started by Jason Edge in General Discussion. Last reply by Chris Codd 21 hours ago. 1 Reply 0 Likes
Vintage Promo Picture #4 - 1963 Fleetwood 60 Special in Nevada Silver
Started by Jason Edge in 1963/64 Cadillac Specific Discussion 22 hours ago. 0 Replies 0 Likes
Here is the 4th picture in my collection of "Promo Pictures" - another 1963 Fleetwood 60 Special. This 60 Special appears to be Nevada Silver, Paint Code 14. …Continue
lighted headlight switch
Started by Bill Wolf in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf on Saturday. 2 Replies 1 Like
I had to replace the heater core in my 63 SDV, so I decided to replace all the dash lights with LED's. and replaced all the vacuum lines. While I was in there, I added a light to the headlight switch…Continue
Blog Posts
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
© 2025 Created by Jason Edge.
Powered by
