Website Header - Experimenting with Rotating Member Cars

I was thinking or rotating member 63's and 64's up in the header and used Mark Geertsma's 1963 Sedan de Ville as a test car. It gets a little grainy making the picture that small, but not too bad. For those of you on the cell phone select desktop view from the drop down menu and check it out. For those you use on desktops & laptops just look up. 

I will maybe swap in a member 64 on the right, and maybe try and update once a week?

Looking at the header I am trying to remember why that black border at very top is there ... and more importantly if I can use that space to extend the header. Working with the Ning layout designs is clunky at best but may be able to improve on it a bit.

Oh... I guess I should put some text across bottom of picture of owner and body style.

Jason. 

Facebook Facebook

Views: 99

Reply to This

Replies to This Discussion

Jason,

     The header looks really good!  A very nice touch added to the website.

Dennis DiBari

Nice!

I have added Christian Doerk's 1964 Fleetwood 60 Special as the '64 in the header and will plan to run each for a week. I will try to tweak the header a bit to make look better going forward. I will really need to use side or wider angle shots to make this work and it helps to have a sky or something uncluttered above or below to add the text.

I will also look at the very top section to see if I can extend the header up to the very top. For some reason I think I tried that one time and had issues for one reason or another. Jason. 

My plan is to run the same header Sunday to Sunday. Since we started this mid week, I will run these two Caddys until Sunday April 6. If you have any side profile car pics you want to use reply below. Else I will just pick from the member cars section in header, newsletters, etc.  Note, it helps to have some uncluttered area above or below the car. 

Excellent addition to the website!

Dennis DiBari

Quick update on spotlighting a member's 63 & 64 Cadillac in the header: It is sort of a paint to construct the header image as there are many parts to it and the size had to be near perfect (330 x 220 pixels to work with) and think I will change this out once a month instead of once a week. That way we get to show off the car more but still rotate each month. I will do a car other than one that is being featured in an upcoming newsletter so we see some fresh pictures.

Tonight I put our round logo in the center and going up into the very top. It looks like I can use some of that space so may be able to get some slightly larger car pictures up there for May.  Stay tuned for more.

RSS

Photos

  • Add Photos
  • View All

Forum

Replace Choke Tube or Install Electric Choke?

Started by Michael Stinson in 1963/64 Cadillac Specific Discussion. Last reply by Patrick Westphal 16 hours ago. 4 Replies

My mechanic has sourced a choke housing and new internals.  As you might expect, the choke tube is damaged and or clogged.  My options are to either replace the choke tube, or my mechanic recommends…Continue

Tags: Electric Choke, Choke Tube

Correct whitewalls

Started by Richard Stanley in 1963/64 Cadillac Specific Discussion 23 hours ago. 0 Replies

 I just replaced my tires from Diamondback (I had bad results in the past from Coker).  It was the second time, due to the age of the tires.  About 18 years ago Diamondback made custom whitewalls…Continue

Tags: width, whitewall, correct

Dino Radiator Leak - Time to Recore!

Started by Jason Edge in General Discussion. Last reply by Jason Edge yesterday. 35 Replies

I had brought up the topic of radiator leaks as a discussion topic for our Chapter Zoom meet-up this past Sunday and thought I would share on our website for everyone and probably do a more formal…Continue

1963 390 upper heater core hose

Started by Kenneth M Karrer in General Discussion. Last reply by Bill Wolf yesterday. 5 Replies

Hello,      My 63 convertible is a low mileage (34k) original car so while I've done some basics, like replacing radiator hoses, belts, and a few gaskets; I've been trying to leave things as is as…Continue

Blog Posts

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service