I was going through one of my Sun test equipment cabinets & found this Delco Remy original electrical equipment booklet for GM passenger cars from 1965. It was interesting to see the trumpet horns were also offered on Chevrolet Pontiac and Buick. 

Views: 409

Attachments:

Reply to This

Replies to This Discussion

Yep, There was a dealer installed long Eldorado horn offered on both the 1963 and 1964 Cadillac model years. The 1964 also included a short trumpet horn as standard equipment, so if you had a body style other than the 64 Eldo and bought the dealer installed optional 64 Eldo horn you ended up with a 4 horn setup. 
It took me over 20 years and 30+ parts cars to finally find a 64 with the correct "896 64 Eldo horns". It is now on my 64 and has the standard Hi and Lo note horns, plus the short and long trumpet horns.

For those that have  not check out our Horn help topics here are the links:


- Horns Used in 1963 & 1964 
- Horns: 1964 Standard 3 Horn Setup  
Horns: 1964 Eldorado Three Horn Setup
Horns: 1964 Four Horn Setup With Optional "896" Eldorado Horn

Jason, have you got any horns available? I have the short trumpet horn but only one of the others. I’m unsure if it’s the low or high and unsure how to tell? 

I currently only have the 64 Hi note horn. They are $50 as pulled, tested working, or $100 cleaned, bead blasted and painted to look like new condition. Of course you get 25% off as a Chapter member. You can see them by Clicking Here.  If you look inside the rim of these standard Hi and Lo Note horns with a light you will see an H or L stamped.  If you have one that isn't quite working or sounds bad there is an adjustment screw on these that if you turn one way or the other can sometimes get them working correctly again. There are placed that rebuild them but it is not cheap. If you need the Lo note horn I can add to my Wait List.

RSS

Photos

  • Add Photos
  • View All

Forum

63 CdV trunk lid issues with the mechanism

Started by Sammy in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge on Tuesday. 3 Replies

Hello folks,on a drive this weekend I had to open the trunk. Used the remote in the glovebox and it popped open a bit, but further opening was very hard und slow. I stood on the side of a main street…Continue

Take heads off for rebuild

Started by Ian Arnold in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge Aug 2. 3 Replies

Compression test 15 years ago was good. Not a lot of miles since then. Summer car.Last year had a oil pressure issue. Found an aluminum flake had stuck open oil pressure relief valve. (Low pressure…Continue

Headlight conversion

Started by Phillip Hill in 1963/64 Cadillac Specific Discussion. Last reply by Phillip Hill Jul 27. 2 Replies

I recently converted my dim yellow headlights to LED after nearly cleaning up a roo the other night see attached pics for before and after …Continue

What parts do you need for your Cadillac?

Started by Russ Austin in General Discussion. Last reply by Russ Austin Jul 23. 2 Replies

What parts to your need for your Cadillac?  Need a part to get it running or just to tidy things up a bit?  Starters to nice A pillar moldings, my 1500 squarer footing shop is packed with parts. …Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Videos

  • Add Videos
  • View All

© 2026   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service