63/64 Cadillac Website

Help with missing bolts

Hi y'all....

Hoping to get some help here. I've checked my reference material and can't seem to find this info.

My 63 convertible, non tilt steering column is missing the firewall bolts on the lower support. I'd like to put some in but don't know what size they are (looks threaded in firewall).

Does anyone know what size bolt to put through there?

Here is a pic for clarity.

Thanks in advance.

Phil

0 members like this

Attachments:

20241102_132044.jpg, 3.4 MB

▶ Reply to This

Replies to This Discussion

Permalink Reply by Jason Edge on November 2, 2024 at 6:56pm

Those are 5/16"-18 raised ridge head bolts, 3/4" long, usually with an external lock washer, but have seen regular ridge head with split lock washer. There is also a wide 1 1/8" fender washer below the bolt and lock washer. I can set you up with freshly gold plated hardware for $12 ($9 after discount) and ship 2-3 day Priority from NC to WA for $10 for a total of $19. If interested email me at jasonedge64@outlook.com or just shoot me a PayPal to that email address.

▶ Reply

Permalink Reply by Phil on November 2, 2024 at 7:13pm

Thank you Jason! VERY helpful!

▶ Reply

RSS

Welcome to
63/64 Cadillac Website

Sign Up
or Sign In

Or sign in with:

Photos

Forum

Which are best Shocks for 64 that are closest to Original in Ride Quality?

Started by Norman Silverman in 1963/64 Cadillac Specific Discussion. Last reply by Norman Silverman 25 minutes ago. 5 Replies 0 Likes

Hello AllI am thinking about replacing the shocks on my 64 SDV. I want to do so with units that are closest to what was originally in the car in so far as ride quality. I believe these were gas…Continue

1964 Cadillac Owners - Are You Missing the Inner Fender to Frame Rear Brace Rods?

Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari 39 minutes ago. 1 Reply 0 Likes

Last night I was installing the freshly cad plated inner fender to frame rear support brace rods and remembered how this has been often missing on the many parts cars I have brought in. The thing is…Continue

Heater Core Replacement

Started by Michael Monson in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 2 hours ago. 2 Replies 0 Likes

I'm currently rounding up parts for a heater core replacement in my 1964 Deville. I'm looking for replacement hoses that connect to the heater core itself. It's a factory a/c car and has the metal…Continue

Finally got around to cleaning and re-lubricating the seat transmission. Now, it works flawlessly

Started by Norman Silverman in 1963/64 Cadillac Specific Discussion on Friday. 0 Replies 0 Likes

When I first got my 64 SDV about 8 years ago, the power seat made noise but didn't go anywhere. I promptly read up on it and proceeded to take the seat transmission out to clean and re-lubricate it.…Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue