What a difference new hub cap emblems make! 

Views: 114

Reply to This

Replies to This Discussion

Micheal 

Very nice finishing touch on the caps does make them POP 

Kinda like —-Classic Antique Cadillac jewelry  
You did an outstanding job on your pride and joy 

Many years of  enjoyment will follow 

Enjoy 

Thank you, Jason.  She’s been a labor (and expense) of love.   There are still a few minor things to do, like replace the rear speaker (which seems to have been lost when I reupholstered the seats),  and eventually rechrome the instrument cluster bezel and driver’s door window and seat switch bezel, both of which have a little bit of pitting.  

Thank you all of your advice and support (and parts!) and everyone in the club.  
Mike

Thank you, Tony!   And thank you for the reply.  My apologies, I thought your post was from Jason.  My bad.

i appreciate all of your encouragement and knowledge.  Thank you!

Mike

Mike 

No Problem !
You can mistake me for Jason —-any time you like —as to me it is a compliment for the very high regard I have for who Jason is in our world of 63-64 Cadillacs 

We are in Cadillac Heaven —-for our year Cadillacs on this site 

These Cadillacs are the most fun you can have —with your cloths on  ! ( or —off across the front or back seat in my younger days ! ) 

Enjoy 

It seems most things you Love a lot ——do get expensive 

I spent all my money -on sex -drugs - rock and roll ( and Cadillacs ) —- and wasted the rest ! 
Enjoy 

These look great! Where did you get them?

Hi Logan,

I ordered them from Caddy Daddy.

Mike

Thanks! This will be an upgrade in the near future for sure. 

RSS

Photos

  • Add Photos
  • View All

Forum

Correct rims and drums?

Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 3 hours ago. 5 Replies

As I am collecting items for a brake overhaul, I’ve have come across many posts about the aftermarket drums not being of quality like the originals. I am fairly certain the drums I have are not…Continue

cooling problem solved

Started by greg in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 6 hours ago. 6 Replies

I have a 64 Fleetwood and in the summertime with the a/c cranking when I would be in traffic or going slow it would always run warm....close to the 3/4 mark sometimes.   I replaced the fan clutch…Continue

Powder Coated Rims

Started by Logan Robb in 1963/64 Cadillac Specific Discussion 20 hours ago. 0 Replies

I have a very reputable blasting and powder coating shop near me, come this winter, I am thinking of getting my wheels power coated in preparation for new tires in the spring. Is this a good idea? I…Continue

Dragging to one side

Started by Sammy in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 on Monday. 9 Replies

Hi there, after a lot of work on my brakes - new cylinder, hardware, shoes, hoses, going back to old drums, the car still drags to one side. Does this for years now, but I hoped to get rid of it…Continue

Blog Posts

WANTED HARMONIC BALANCER BOLT 1964 DEVILLE

Posted by ANGELO MARTINEZ on July 23, 2023 at 10:44pm 3 Comments

  Hope someone can help me to find the harmonic balancer bolt for my 1964 Cadilac Deville 429 engine

in advance, thank you for your help.

Clock ‘64 DeVille

Posted by Matt Vander Hooven on July 23, 2023 at 7:36pm 2 Comments

Is there still a member in the Detroit area that refurbishes clocks?

Matt VH

Spark Plug Heat Range

Posted by Patrick Westphal on July 7, 2023 at 10:00am 3 Comments

I found a diagram that illustrates the main factor in determining a spark plug heat range that I was trying to describe to you during the chapter get together.

Here it is:

 

The main factor is the length of the ceramic insulator from the middle of the spark plug to the tip (where the spark happens)  

The insulator…

Continue

Lower Front End Ball Joints

Posted by Logan Robb on May 11, 2023 at 9:04am 7 Comments

Good Morning all! 



I took the 64 into the shop to have some adjustments completed and in the process decided to have the lower ball joints replaced as was recommended the last time I had it in. I ordered the parts and came into the shop. They quoted me nearly $500 to replace those lower ball joints requiring nearly 4hrs of labor. Now this is a reputable shop and they know me by name here and they will continue to get my business. I am just questioning what on earth is…

Continue

Videos

  • Add Videos
  • View All

© 2023   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service