I'm in the process of rebuilding the front suspension with a kit from Kanter. The original upper ball joints were tack welded in as is often the norm.
The replacement ball joints came with a bracket with a hole that looks like it might prevent the ball joint from turning and maybe you could put a bolt through into the control arm to retain it? Unfortunately the kit came with no instructions.
The odd thing is if I install the ball joint as shown in the photo, the bracket won't sit flush with the control arm and will have to be compressed severely to make the joint seat completely.
The only other difference between the old joint and new is the grease boot threads on rather than relying on a spring to hold it secure to the joint.
Anybody seen this before?
Tags:
That's normal, just run a bead down to the control arm.
Hi Russ,
Thanks for response. I know tack welding the ball joint is normal but the bracket is what I'm not sure of. Are you saying to weld the bracket to the control arm?
The upper ball joints are side specific. They press into the control arm from the top until they seated in the control arm. The flange on the joint should be squared up with equal space from the control arm sides. The flange keeps the ball joint from possibly spinning in the hole. The nut screws on from the bottom side and is tightened securely to keep the ball joint in place. Be sure to put right on right side, left on the left. It's very important. HTH.
Thanks David, that makes sense. I appreciate the help!
Scott Santora Online
Started by Larry Rees in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 23 hours ago. 21 Replies 1 Like
Neither of my cornering lights are working. I started by focusing on drivers side. I removed the entire assembly and cleaned it up, replaced the wire to the socket, cleaned and lubricated the socket…Continue
Started by Doug Scarrow in For Sale yesterday. 0 Replies 0 Likes
just listed solid 1963 1964 non tilt steering wheel. https://www.ebay.com/itm/266784089004$120 plus shippingContinue
Started by Larry Rees in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge yesterday. 9 Replies 0 Likes
I have a 64 Cadillac Deville convertible. When the wiper switch is turned on the washer pump activates continuosly no mater what speed is selected. Washer pump shuts off when wiper switch shut off.…Continue
Started by Russ Austin in For Sale. Last reply by Russ Austin on Wednesday. 2 Replies 0 Likes
I have 2 working T-3 low beam headlights and numerous T-3 high beam headlights for sale. Low beams are 22 each and high beams are 15.00 each plus shipping. Please email me at russ@thecadishack.com …Continue
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 0 Likes
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 0 Likes
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment 0 Likes
My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns.
There is a restoration service called The Horn Works who my son…
Continue© 2024 Created by Jason Edge. Powered by