Posted on July 6, 2013 at 8:07pm 10 Comments 0 Likes
I have figured out why the power seat in my '63 convertible moves so slowly. The motor works fine by itself, but the gears in the power seat transmission are really sticky. When you turn the input shaft by hand it is hard to make it turn, they are so sticky. What do you clean the old stuff off with? The gears are nylon. I don't want to melt them with a solvent. After getting the sticky off, what type of lubricant…
ContinuePosted on July 6, 2013 at 8:00pm 1 Comment 0 Likes
"I need to replace the foam in the front seat cushion of my '63 convertible. Do pre-fabricated foam sets exist for this car? All I find are ones for the muscle cars and sports cars. Any recommendations for the type and thickness of foam to get, if I can't find pre-fabs?"
Posted on December 15, 2012 at 1:47am 1 Comment 0 Likes
After purchasing my '63 convertible and driving it occasionally for a year I decided that I would replace my leased 2001 DTS with a 1970 Eldorado, which has now been my daily driver for 9 years. I repainted it to look just like the Eldorado in the 1970 Cadillac brochure. It is Cinnamon with a dark brown vinyl roof. I think it is prettier than my '63.
Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion. Last reply by Kurt 2 hours ago. 7 Replies 1 Like
Out of curiosity,, is the 63 64 engine capable of burning rubber off of a stop light? Not a hold the brake and rev up and release, but from a stop, to burn rubber power?I know mine wont because i…Continue
Started by Kenneth Barton in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin on Wednesday. 1 Reply 0 Likes
Hi everyone, I installed a new gas tank sender in my 63 after bench testing it and confirming ohm range on the bench.However after installing and filling it up, it only reads half full after filling…Continue
Started by Jeff Donaldson in General Discussion. Last reply by Dennis P. DiBari on Monday. 1 Reply 0 Likes
Hi,It's time to do a brake job on my Fleetwood. When I imported my car from the US to Canada I had to have my car safety inspected before I could license it in the Privince of BC. After the…Continue
Started by Michael Monson in 1963/64 Cadillac Specific Discussion. Last reply by Michael Monson Feb 15. 6 Replies 0 Likes
I'm currently rounding up parts for a heater core replacement in my 1964 Deville. I'm looking for replacement hoses that connect to the heater core itself. It's a factory a/c car and has the metal…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Switch to the Mobile Optimized View
© 2026 Created by Jason Edge.
Powered by
Comment Wall (1 comment)
You need to be a member of 63/64 Cadillac Website to add comments!
Join 63/64 Cadillac Website
Welcome to the new 63/64 Cadillac Site.
Jason