Just ordered new tires for my 63.
As the front wheels have reasonable wear I want to align them or at least
have them aligned, but not sure if the alignment data in our shop manual
are still the right ones for the radial tires today?
Tags:
Gutenberg Morgen Sammy,
camber radials: Left 0 degrees and Right 1/4 degrees
caster radials +2 degrees
toe in no more than 1/8
had mine done last month ,came out really good. Good Luck
Caster angle really positive?
For the camber it says 1/4 or 1/2 more positive on left side.
So it's different to recommendations in the shop manual.
How did you determine the values?
Guten Morgen, sorry Sammy .my German is terrible
Yes
Sammy, check out the help section,look up alignment. You’ll see that there where other members who had alignments done with those adjusted numbers that have been successful for these cars with radial tires. It worked for me
Started by Jason Edge in General Discussion. Last reply by Jason Edge 10 hours ago. 35 Replies 0 Likes
I had brought up the topic of radiator leaks as a discussion topic for our Chapter Zoom meet-up this past Sunday and thought I would share on our website for everyone and probably do a more formal…Continue
Started by Kenneth M Karrer in General Discussion. Last reply by Bill Wolf 12 hours ago. 5 Replies 0 Likes
Hello, My 63 convertible is a low mileage (34k) original car so while I've done some basics, like replacing radiator hoses, belts, and a few gaskets; I've been trying to leave things as is as…Continue
Started by Michael Stinson in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari 14 hours ago. 3 Replies 1 Like
My mechanic has sourced a choke housing and new internals. As you might expect, the choke tube is damaged and or clogged. My options are to either replace the choke tube, or my mechanic recommends…Continue
Tags: Electric Choke, Choke Tube
Started by Bill Wolf in 1963/64 Cadillac Specific Discussion. Last reply by Michael Stinson 14 hours ago. 3 Replies 2 Likes
I had to replace the heater core in my 63 SDV, so I decided to replace all the dash lights with LED's. and replaced all the vacuum lines. While I was in there, I added a light to the headlight switch…Continue
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
© 2025 Created by Jason Edge.
Powered by