The 63/64 Cadillac Website at www.6364cadillac.com will transition to a Public Restricted Website. This means that anyone can publicly view the website, however, you will need to be a CLC and Chapter member to post to the website.
As of today, November 1, 2023, I am only allowing CLC (Cadillac & LaSalle Club) members to join the 63/64 Cadillac Chapter Website.
As of January 1, 2024, all non-members and their content will be removed from the website.
This gives everyone that is not already a member two months to sign up to the Cadillac & LaSalle Club. I will send out reminders as January 1 approaches but wanted to give everyone an early heads up. After reading the details below, please consider joining the CLC and our Chapter if not already a member.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
It has always been a source of confusion that non-CLC and non-Chapter Members have been able to join the 63/64 Cadillac Chapter Website. I am constantly getting the "I'm already a Chapter Member" comment from those that have joined the website but have never joined the CLC (Cadillac & LaSalle Club) or our Chapter.
If you are CLC and 63/64 Cadillac Chapter Member --> Thanks for the Support! We encourage you to continue to use our Forums and encourage other non-members to join the CLC, which will give then access to the forums.
If you are not a CLC and 63/64 Chapter Member --> check out the many benefits of membership at www.benefits.cadillaclasalleclub.org then join at www.join.cadillaclasalleclub.org
Jason Edge
Director & Webmaster: 1963/64 Cadillac Chapter
jasonedge64@outlook.com
Tags:
I hope everyone had a good Christmas.
With less than a week before we transition to a Members Only website, now would be a good time to Join the CLC and our Chapter if not already a members.
You can check out the many benefits of membership at www.benefits.cadillaclasalleclub.org
... then join at www.join.cadillaclasalleclub.org
I will post details of how this will work 2 or 3 days before the 1st.
Stay tuned.
Jason.
Started by Jordan Johansen-Moe in 1963/64 Cadillac Specific Discussion 22 hours ago. 0 Replies 0 Likes
Is anyone here planning on going to the Back to the 50’s car show in Minnesota?
Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge yesterday. 2 Replies 0 Likes
Hi allwhere can I find these - 1963 Cadillac Plastic Door Pin Anchors. Mine are from1963 and a little tiredThanksContinue
Started by Kurt in 1963/64 Cadillac Specific Discussion. Last reply by Matti Roth on Saturday. 15 Replies 4 Likes
Many owners have reported oil leaks at the rear main seal even after replacing the seal, myself included. Recently Tony Lentini found a Serviceman bulletin published in February 1965 which details a…Continue
Started by Jason Edge in Restoration Discussion. Last reply by Jason Edge on Thursday. 6 Replies 0 Likes
First, A Big Thank You to CLC Chief Judge Bill Anderson for taking on this daunting task of overhauling the CLC judging system. The old system was very good, however, I believe what Bill and the…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
June 22, 2025 from 8pm to 9:30pm – Zoom
0 Comments 1 Like
© 2025 Created by Jason Edge.
Powered by