Windshield washer pump inoperative
I have spent a few hours trying to get pump to pump fluid. The lines are all clear, The pump Is working as it should when the washer button is pushed. I have a spare wiper motor assembly which I have switched parts around with. The diaphragm is in good condition, The only idea I have at this point is that the seal around the valves is leaking. I tried to coat the seal with Vaseline but no difference.
Any ideas where to go next?
Does any body out there have any idea if the seal is available anywhere?
- Attachments:
-
-
Windshield washer pump.jpg, 155 KB
-
Replies to This Discussion
-
Permalink Reply by Wayne Morris on
-
Once I get the rebuild kit installed, I'll let you know how I made out.
Wayne
-
Permalink Reply by Dennis P. DiBari on
-
Wayne,
If it is the W/W pump piston itself, I also have a rebuilder who is great. Jason's contact is a great recommendation!
Dennis DiBari
-
-
Yesterday I installed the windshield washer pump kit, I primed it and it worked! I did have to clear nozzles and replace the lines to them but all is working now.
Thanks all who contributed.
Wayne Morris
-
-
Great news Wayne!
Dennis DiBari
- ‹ Previous
- 1
- 2
- Next ›
Members
Forum
Future of CLC Judging
Started by Jason Edge in Restoration Discussion. Last reply by Jason Edge 7 hours ago. 4 Replies 0 Likes
First, A Big Thank You to CLC Chief Judge Bill Anderson for taking on this daunting task of overhauling the CLC judging system. The old system was very good, however, I believe what Bill and the…Continue
front seat crest
Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Frank Murch 22 hours ago. 3 Replies 0 Likes
Original seats had a crest on the center arm rest. Does anybody know where I could embose a crest in new material for a reupolstry?Continue
Coolant Overflow Bottle / Reservoir for 64 Cadillac Eldorado
Started by Michael Stinson in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf yesterday. 7 Replies 0 Likes
Greetings Everyone. I read a discussion thread about "radiator and related", covering coolant overflow. Has anyone fitted an overflow reservoir / bottle to their 64 Cadillac? Is there if a…Continue
Dino Radiator Leak - Time to Recore!
Started by Jason Edge in General Discussion. Last reply by Bill Wolf on Friday. 36 Replies 0 Likes
I had brought up the topic of radiator leaks as a discussion topic for our Chapter Zoom meet-up this past Sunday and thought I would share on our website for everyone and probably do a more formal…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Events
Videos
© 2025 Created by Jason Edge.
Powered by
