Here is my email innamoratojoseph@gmail.com cell is 917-577-3555
Who ever did the repaint didn’t do a great job the only good thing they didn’t spray the inside of the trunk or doors they old made a mess
they put on th 3M body side moldings when I try to remove some panels had the clip holes an another panel had the body filled but you could see where they sre
i just want to acquire the Moulding so when I ready to have it painted
they can be installed
the car is a survivor not as pristine as yours and the others in the club
but in time I want to get to that point t’s trustworthy to drive
Many owners have reported oil leaks at the rear main seal even after replacing the seal, myself included. Recently Tony Lentini found a Serviceman bulletin published in February 1965 which details a…Continue
First, A Big Thank You to CLC Chief Judge Bill Anderson for taking on this daunting task of overhauling the CLC judging system. The old system was very good, however, I believe what Bill and the…Continue
Greetings Everyone. I read a discussion thread about "radiator and related", covering coolant overflow. Has anyone fitted an overflow reservoir / bottle to their 64 Cadillac? Is there if a…Continue
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
Dennis P. DiBari's Comments
Comment Wall (10 comments)
You need to be a member of 63/64 Cadillac Website to add comments!
Join 63/64 Cadillac Website
Thanks, has been a fun project.
Thanks! Like the color on your 64. You don’t see that very often.
Thanks so much Dennis! Little by little it'll turn into something I can enjoy and be proud of like yourself and the other great chapter members!
Hi Dennis, yes it is , have a look at the description board that I just posted. Thanks.
Thanks Dennis! Aquamarine is one of my favorite colors for the Eldorado and I let more than a few in this color slip out of my hands, not this time :)
Good Morning
Here is my email innamoratojoseph@gmail.com cell is 917-577-3555
Who ever did the repaint didn’t do a great job the only good thing they didn’t spray the inside of the trunk or doors they old made a mess
they put on th 3M body side moldings when I try to remove some panels had the clip holes an another panel had the body filled but you could see where they sre
i just want to acquire the Moulding so when I ready to have it painted
they can be installed
the car is a survivor not as pristine as yours and the others in the club
but in time I want to get to that point t’s trustworthy to drive
needs work only have 3 months
sorry for the long winded email
thanks for reaching out
have a great day
joe
Thank you it was redone about a year ago
the previous owner had it done ,he was going to redo the paint but he bought a 1960 coupe and he having it painted &100% frame off restoration
that great it nicer up there
tha
Sorry
I m from Bay Ridge and you are you local
Dennis
thank you glad to be part of this club
the paint color is Royal Marron paint code 52
there are imperfections in the paint but now I just making sure it’s mechanically sound
this winter maybe I tackle the paint
Interior was done as was the carpet
Dennis, Welcome to the 1963/64 Cadillac Chapter & Website. I will get your formally signed up to the Chapter later today. Welcome aboard! Jason.
Welcome to
63/64 Cadillac Website
Sign Up
or Sign In
Or sign in with:
Photos
Members
KEVIN P Kennedy
Xadrian
Jacob Foster
Rick Yasenchack
Erik LaValle
Brandon N.
Maurice Hamelink
thomas servas
Ian Arnold
Joe
Kevin deGraauw
Mack
Forum
Rear Main Seal Oil Leak Fix with Bearing Cap Modification
Started by Kurt in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari 5 hours ago. 14 Replies 4 Likes
Many owners have reported oil leaks at the rear main seal even after replacing the seal, myself included. Recently Tony Lentini found a Serviceman bulletin published in February 1965 which details a…Continue
Future of CLC Judging
Started by Jason Edge in Restoration Discussion. Last reply by Jason Edge 15 hours ago. 6 Replies 0 Likes
First, A Big Thank You to CLC Chief Judge Bill Anderson for taking on this daunting task of overhauling the CLC judging system. The old system was very good, however, I believe what Bill and the…Continue
front seat crest
Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Frank Murch yesterday. 3 Replies 0 Likes
Original seats had a crest on the center arm rest. Does anybody know where I could embose a crest in new material for a reupolstry?Continue
Coolant Overflow Bottle / Reservoir for 64 Cadillac Eldorado
Started by Michael Stinson in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf on Tuesday. 7 Replies 0 Likes
Greetings Everyone. I read a discussion thread about "radiator and related", covering coolant overflow. Has anyone fitted an overflow reservoir / bottle to their 64 Cadillac? Is there if a…Continue
Tags: Radiator, Bottle, Reservoir, Overflow, Coolant
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
Continue'63 Tailfin Tales
Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments 0 Likes
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…

ContinueEvents
CLC & CLC Museum & Research Center National Events Through 2028
June 2, 2025 to May 1, 2026 – Across the USA!
1 Comment 0 LikesCadillac Fall Festival and All-GM Car Show - Sept 26-27, 2025
September 26, 2025 to September 27, 2025 – Gilmore Car Museum
0 Comments 0 LikesVideos
Guitars & Cadillacs
Added by Kurt 0 Comments 0 Likes
UFCU commercial
Added by Kurt 1 Comment 0 Likes
May 16, 2024 Finish honing with a Torque plate
Added by CHRIS CARLSON 0 Comments 0 Likes