I sent in my registration for the Boston GN today and am really getting excited! There is a ton of free stuff including the Seminars, Car Show and Reception and other cool tours such as the Historic Boston Tour, Historic Salem Witch Tour, and so much more that will satisfy us Cadillac Nuts, our wives, and the kids. I will not have the 64 CDV on hand but…
ContinueAdded by Jason Edge on May 30, 2013 at 8:30pm — No Comments
When I detailed my engine bay last year after the engine rebuild I never went back and installed the new set of inner fender splash aprons I ordered. I've just installed the larger rear apron because it is partially held on via 3 inner fender bolts. I think I've got the drilling the holes out slightly to 1/16" and clinching the new staples to give it the original look but man that is slow going. I've ended up installing just one staple on both sides for now. With the other 4 pieces (2 per…
ContinueAdded by Jason Edge on May 29, 2013 at 8:07pm — 2 Comments
Added by Jason Edge on May 28, 2013 at 8:40am — No Comments
Love those old Cadillac Ads... especially if they are for a 63 or 64 Cadillac!
Added by Jason Edge on May 28, 2013 at 7:54am — No Comments
Added by Jason Edge on May 28, 2013 at 7:37am — 1 Comment
I have just completed and posted the May 2013 1963/64 Cadillac Chapter newsletter to our Newsletter Page. You can also access it by clicking on…
Added by Jason Edge on May 27, 2013 at 6:30pm — No Comments
Added by Jason Edge on May 27, 2013 at 8:11am — 1 Comment
Added by Jason Edge on May 26, 2013 at 4:46pm — No Comments
Added by Jason Edge on May 26, 2013 at 8:34am — No Comments
Added by Jason Edge on May 25, 2013 at 4:55pm — 1 Comment
Added by Jason Edge on May 24, 2013 at 9:18am — No Comments
Added by Jason Edge on May 23, 2013 at 6:52pm — 1 Comment
Added by Jason Edge on May 22, 2013 at 10:02am — No Comments
Added by Jason Edge on May 20, 2013 at 4:23pm — No Comments
Added by Jason Edge on May 20, 2013 at 6:38am — No Comments
I've started replacing my worm gear clamps with correct for 63/64 tower clamps and started with the radiator hose clamps on the top and had to screw the 2 1/16" top clamps almost all the way to get them to tighten. After running the engine I noticed I had a drip leak on the top radiator side clamp and I…
ContinueAdded by Jason Edge on May 19, 2013 at 9:00am — 2 Comments
Added by Jason Edge on May 18, 2013 at 6:56am — 1 Comment
I'm really looking forward to our local meet-up today with the Eastern NC CLC region and had the 64 CDV out for a spin last night with Cheryl and Lucky. It's cleaned up and full of gas and ready for today!
Yesterday I replaced some of the worm gear hose clamps with tower clamps and worked on a few other odds and ends and she is purring like a kitten!
Here's a quick picture of the Caddy outside our local AutoZone picking up some supplies. That is Miss Lucky looking out the…
ContinueAdded by Jason Edge on May 18, 2013 at 6:52am — 1 Comment
Added by Jason Edge on May 17, 2013 at 4:29pm — 1 Comment
Added by Jason Edge on May 16, 2013 at 5:29pm — 1 Comment
2023
2020
2019
2016
2015
2014
2013
2012
Scott Santora Online
Started by Larry Rees in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 12 hours ago. 21 Replies 0 Likes
Neither of my cornering lights are working. I started by focusing on drivers side. I removed the entire assembly and cleaned it up, replaced the wire to the socket, cleaned and lubricated the socket…Continue
Started by Doug Scarrow in For Sale yesterday. 0 Replies 0 Likes
just listed solid 1963 1964 non tilt steering wheel. https://www.ebay.com/itm/266784089004$120 plus shippingContinue
Started by Larry Rees in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge yesterday. 9 Replies 0 Likes
I have a 64 Cadillac Deville convertible. When the wiper switch is turned on the washer pump activates continuosly no mater what speed is selected. Washer pump shuts off when wiper switch shut off.…Continue
Started by Russ Austin in For Sale. Last reply by Russ Austin yesterday. 2 Replies 0 Likes
I have 2 working T-3 low beam headlights and numerous T-3 high beam headlights for sale. Low beams are 22 each and high beams are 15.00 each plus shipping. Please email me at russ@thecadishack.com …Continue
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 0 Likes
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 0 Likes
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment 0 Likes
My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns.
There is a restoration service called The Horn Works who my son…
Continue© 2024 Created by Jason Edge. Powered by