I am looking to replace my battery for 64 DeVille. Any suggestions on the type and where to purchase?
Tags:
Check out Menards they have the big AC deacons batteries with top posts , check your dimensions of your old battery and the placement of the + & - posts and figure out if your hold down will work . Good luck
DELCO
You have a few choices. You can go all out and purchase a original style replica per this article from the Help topics tab in the header above: https://6364cadillac.ning.com/profiles/blogs/original-battery-and-c...
Personally I bought a group 24 Duracell battery from Batteries Plus Bulbs and have been happy with it, It is close to the size of the original battery, just slightly narrower - group 24:(10.25 x 6.8125 x 8.875) vs group 60: (13 1/16 x 6 5/16 x 8 7/8). It still fits nicely in the original battery tray. I did put some plastic strips along the right & left sides of the tray to take up the extra space. I also peeled off all the labels and dressed it up with some 3-D printed battery caps and a Delco label.
John, I just noticed you said your car is a 64. The battery hold-down was changed in 64 to go across the 13 1/6" length of the battery unlike my 63 where it goes front to back across 6 5/16" (6.8125"on group 24). As far a I can find now the group 60 replica is no longer produced. Unless you can find a similar sized battery, you will have to use a different hold-down. I'm sure some 64 guys will chime in with their solutions
Started by Jacob Foster in 1963/64 Cadillac Specific Discussion. Last reply by Linda M. Brooks yesterday. 2 Replies 0 Likes
Gents, good morning!I’m looking for advice on how to fix the A/C Power Servo on my 1964 Cadillac Deville. The unit itself seems to be working correctly, but the vacuum actuator is leaking off. Has…Continue
Started by David Erickson in General Discussion. Last reply by Linda M. Brooks yesterday. 3 Replies 0 Likes
Couple of question on my 63 Park Avenue1. I had my car worked on last summer by my mechanic who restores casr primarily. He does not work on transmissions. He said there was a small transmission…Continue
Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by Linda M. Brooks on Sunday. 7 Replies 1 Like
Last night I was installing the freshly cad plated inner fender to frame rear support brace rods and remembered how this has been often missing on the many parts cars I have brought in. The thing is…Continue
Started by Jason Edge in General Discussion. Last reply by Dennis P. DiBari on Friday. 1 Reply 0 Likes
Here is a 1963 & 1964 Eldorado I saw at Mecum auction in Kissimmee, Florida today. This was today’s main activity as part of the 2026 CLC Winter Reunion in Orlando. There are over 4,200 event at…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
January 18, 2026 from 7pm to 8:30pm – Zoom
0 Comments 0 Likes
© 2026 Created by Jason Edge.
Powered by