I am looking to replace my battery for 64 DeVille. Any suggestions on the type and where to purchase?
Tags:
Check out Menards they have the big AC deacons batteries with top posts , check your dimensions of your old battery and the placement of the + & - posts and figure out if your hold down will work . Good luck
DELCO
You have a few choices. You can go all out and purchase a original style replica per this article from the Help topics tab in the header above: https://6364cadillac.ning.com/profiles/blogs/original-battery-and-c...
Personally I bought a group 24 Duracell battery from Batteries Plus Bulbs and have been happy with it, It is close to the size of the original battery, just slightly narrower - group 24:(10.25 x 6.8125 x 8.875) vs group 60: (13 1/16 x 6 5/16 x 8 7/8). It still fits nicely in the original battery tray. I did put some plastic strips along the right & left sides of the tray to take up the extra space. I also peeled off all the labels and dressed it up with some 3-D printed battery caps and a Delco label.
John, I just noticed you said your car is a 64. The battery hold-down was changed in 64 to go across the 13 1/6" length of the battery unlike my 63 where it goes front to back across 6 5/16" (6.8125"on group 24). As far a I can find now the group 60 replica is no longer produced. Unless you can find a similar sized battery, you will have to use a different hold-down. I'm sure some 64 guys will chime in with their solutions
Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion. Last reply by Linda M. Brooks on Thursday. 5 Replies 1 Like
Out of curiosity,, is the 63 64 engine capable of burning rubber off of a stop light? Not a hold the brake and rev up and release, but from a stop, to burn rubber power?I know mine wont because i…Continue
Started by Kenneth Barton in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin on Wednesday. 1 Reply 0 Likes
Hi everyone, I installed a new gas tank sender in my 63 after bench testing it and confirming ohm range on the bench.However after installing and filling it up, it only reads half full after filling…Continue
Started by Jeff Donaldson in General Discussion. Last reply by Dennis P. DiBari on Monday. 1 Reply 0 Likes
Hi,It's time to do a brake job on my Fleetwood. When I imported my car from the US to Canada I had to have my car safety inspected before I could license it in the Privince of BC. After the…Continue
Started by Michael Monson in 1963/64 Cadillac Specific Discussion. Last reply by Michael Monson on Sunday. 6 Replies 0 Likes
I'm currently rounding up parts for a heater core replacement in my 1964 Deville. I'm looking for replacement hoses that connect to the heater core itself. It's a factory a/c car and has the metal…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
© 2026 Created by Jason Edge.
Powered by