I am looking to replace my battery for 64 DeVille. Any suggestions on the type and where to purchase? 

Views: 241

Reply to This

Replies to This Discussion

Check out Menards they have the big AC deacons batteries with top posts , check your dimensions of your old battery and the placement of the + & -  posts  and figure out if your hold down will work . Good luck 

DELCO

You have a few choices. You can go all out and purchase a original style replica per this article from the Help topics tab in the header above: https://6364cadillac.ning.com/profiles/blogs/original-battery-and-c...

Personally I bought a group 24 Duracell  battery from Batteries Plus Bulbs and have been happy with it, It is close to the size of the original battery, just slightly narrower - group 24:(10.25 x 6.8125 x 8.875) vs group 60: (13 1/16 x 6 5/16 x 8 7/8). It still fits nicely in the original battery tray. I did put some plastic strips along the right & left sides of the tray to take up the extra space. I also peeled off all the labels and dressed it up with some 3-D printed battery caps and a Delco label.

John, I just noticed you said your car is a 64. The battery hold-down was changed in 64 to go across the 13 1/6" length of the battery unlike my 63 where it goes front to back across 6 5/16" (6.8125"on group 24). As far a I can find now the group 60 replica is no longer produced. Unless you can find a similar sized battery, you will have to use a different hold-down. I'm sure some 64 guys will chime in with their solutions

RSS

Photos

  • Add Photos
  • View All

Forum

Power Booster Install

Started by Rob Spring in 1963/64 Cadillac Specific Discussion. Last reply by Rob Spring on Tuesday. 9 Replies

Hey! I’ve seen the 63/64 power booster and master cylinder combination has been covered very clearly. I’m in the process of replacing mine. I was hoping someone could give me insight on a specific…Continue

1964 Cadillac Deville Neutral Safety switch and Oil Filter Housing Assembly

Started by Michael Monson in Wanted to Buy. Last reply by Russ Austin on Monday. 3 Replies

Hello, possibly looking a neutral safety switch for a 1964 Deville with the TH-400 and tilt steering.  Also, possibly looking for an oil filter housing assembly for a 1964 429 motor.  Starting to get…Continue

Complete Front End Rebuild

Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Mark Mata Apr 3. 1 Reply

I meant to make this a priority over the winter and didn't get that far. I've tried to source all the parts individually, but that is a daunting task. Partly because I don't want to miss any…Continue

A Shout Out to Alan Grist & Some Pictures of His 1964 Series 62 4W Sedan

Started by Jason Edge in General Discussion. Last reply by Dennis P. DiBari Apr 2. 2 Replies

As they say, Better Late Than Never!I want to give a shout out to 63/64 Chapter Member Alan Grist, who brought his 64 Series 62 Four Window Sedan, to the 2025 CLC Winter Board Meeting in Chattanooga,…Continue

Blog Posts

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 13 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service