Center Console
Hello! As I am driving my 64 more frequently (actually its my daily driver right now as my 08 CTS is in the shop) and I am realizing I need a cupholder or something. I am attempting to build one and we shall see how that goes.
But I am wondering if there are any commercially available consoles that work for our cars? Something that can just be installed-No drilling, No modifications. Just something practical and looks decent. Let me know what y'all use, if anything!
Thanks!
Logan.
Replies to This Discussion
-
Permalink Reply by 3ft7bqmb7dryo on
-
None custom built readily available. It seems that Face Book scammers has targeted folks on this particular interest, be wary.
-
Permalink Reply by Robert Schles on
-
I had a cup hold made for my 64 by Cup Holders Plus https://www.cupholdersplus.com. It works great. It sits on the hump just under the radio, very convenient for hold a cup of coffee and cell phone.
-
Permalink Reply by Michael Vogler on
-
Yes there is. I got mine from OPGI in black and it’s awesome. Fits right over the transmission well hump like a glove. Lifts right in and out. Here’s the link. https://www.opgi.com/interior-accessories/console/hump-hugger-conso...
Mike
-
-
OPGI gets them from Cup Holders Plus. Here's a picture:
Photos
Members
Forum
Front door handle lights not working
Started by Bill Wolf in 1963/64 Cadillac Specific Discussion. Last reply by Kurt yesterday. 1 Reply 0 Likes
My front door handle lights would not go on when I opened the doors. Bulbs were good and had power to them. Was not getting a ground. The door switch was corroded and wasn't making contact when the…Continue
lighted headlight switch
Started by Bill Wolf in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf on Saturday. 2 Replies 1 Like
I had to replace the heater core in my 63 SDV, so I decided to replace all the dash lights with LED's. and replaced all the vacuum lines. While I was in there, I added a light to the headlight switch…Continue
Rear suspension project
Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Robert Alan Shannon May 13. 9 Replies 0 Likes
I’m starting the complete rear suspension update/upgrade-new springs and shocks,replacing spherical joint and bushings on yoke and control links! Just wondering if there are any tips to help with the…Continue
TV rod adjustment 1963 Cad
Started by Mark Geertsma in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin May 12. 4 Replies 0 Likes
I’m struggling with my TV rod adjustment. I’ve been trying to adjust it as per shop manual, but it’s still not OK. When cold, it shifts smoothly through all four gears, when hot, it hesitates (lots…Continue
Tags: adjustment, rod, TV
Blog Posts
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
© 2025 Created by Jason Edge.
Powered by
