Center Console
Hello! As I am driving my 64 more frequently (actually its my daily driver right now as my 08 CTS is in the shop) and I am realizing I need a cupholder or something. I am attempting to build one and we shall see how that goes.
But I am wondering if there are any commercially available consoles that work for our cars? Something that can just be installed-No drilling, No modifications. Just something practical and looks decent. Let me know what y'all use, if anything!
Thanks!
Logan.
Replies to This Discussion
-
Permalink Reply by 3ft7bqmb7dryo on
-
None custom built readily available. It seems that Face Book scammers has targeted folks on this particular interest, be wary.
-
Permalink Reply by Robert Schles on
-
I had a cup hold made for my 64 by Cup Holders Plus https://www.cupholdersplus.com. It works great. It sits on the hump just under the radio, very convenient for hold a cup of coffee and cell phone.
-
Permalink Reply by Michael Vogler on
-
Yes there is. I got mine from OPGI in black and it’s awesome. Fits right over the transmission well hump like a glove. Lifts right in and out. Here’s the link. https://www.opgi.com/interior-accessories/console/hump-hugger-conso...
Mike
-
-
OPGI gets them from Cup Holders Plus. Here's a picture:
Members
Forum
Rear Main Seal Oil Leak Fix with Bearing Cap Modification
Started by Kurt in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari 21 hours ago. 14 Replies 4 Likes
Many owners have reported oil leaks at the rear main seal even after replacing the seal, myself included. Recently Tony Lentini found a Serviceman bulletin published in February 1965 which details a…Continue
Future of CLC Judging
Started by Jason Edge in Restoration Discussion. Last reply by Jason Edge yesterday. 6 Replies 0 Likes
First, A Big Thank You to CLC Chief Judge Bill Anderson for taking on this daunting task of overhauling the CLC judging system. The old system was very good, however, I believe what Bill and the…Continue
front seat crest
Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Frank Murch on Tuesday. 3 Replies 0 Likes
Original seats had a crest on the center arm rest. Does anybody know where I could embose a crest in new material for a reupolstry?Continue
Coolant Overflow Bottle / Reservoir for 64 Cadillac Eldorado
Started by Michael Stinson in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf on Tuesday. 7 Replies 0 Likes
Greetings Everyone. I read a discussion thread about "radiator and related", covering coolant overflow. Has anyone fitted an overflow reservoir / bottle to their 64 Cadillac? Is there if a…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Events
Videos
© 2025 Created by Jason Edge.
Powered by
