Does anyone know the length of the webbing of the center front seat belt? Or can anyone measure it? I got a knuckle and have the correct webbing material.

Views: 318

Reply to This

Replies to This Discussion

Christian,

Jason had posted this in the help section:

http://6364cadillac.ning.com/photo/illustration2?context=album&...

And this:

http://6364cadillac.ning.com/forum/topics/seat-belt-fabric-length

Although no dimension is given for a front center belt, It seems likely to me that it would be the same as the other front belts without a retractor. Unfortunately that dimension is not given here. 

I do have a pair of non-retracting belts that I believe came original in my '63 convertible. I can measure those for you if you want.

Thank you Jason. If you would measure the center webbing this would be great. I have the seat belt installation instructions too, but without any dimensions.

I have the factory belts in mine, I can measure it late on today.

I always run with the arm rest down, and I have to be honest, I don't recall a centre belt in the Fleetwood.

That would be great! In Germany we need seat belts at the front center seating position to have the permission transporting 3 persons on the front bench if the outer positions already have seat belts.

Christian,

This is what I have. The short (non buckle) side is 21" and the buckle side is 42" total. I photographed that one with the buckle set half way. Obviously these measurements do not include the material that is folded over and stiched.

These measurements are very close to the ones Jason has for the retracting belts in the help section.

Perfect! Thank you so much!

Hi Christian. I checked your german, let me call it traffic law, and i saw that when a car is original and came for the first time on the road before 1970, seatbelts were not obligated. Kein anschnallpflicht.

Yes you are right if you are an adult :) Kids until 12 have to buckled up, no matter what year the car was build. It's a big problem with cars, which never had seat belts. You always need a special inspection if you add seat belts in that kind of car. That was the reason I added seat belts. My boys are 4 and 7 now.

If you don't have seat belts, the car always will be registered with 5 seats. If you have seat belts on all 6 positions, you can add the 6th passenger in your papers. Wired but that's the law in Germany ;)

Wichtiger Hinweis der Juristen: Seit 2006 gelten neue Regeln, insbesondere bei der Mitnahme von Kindern. Kinder unter 3 Jahren haben in einem Oldtimer ohne Gurte nichts verloren. Bis zu einer Körpergröße von 1,50 m oder 12 Jahren müssen sie hinten Platz nehmen. Hat der Oldtimer nur auf den Vordersitzen Gurte, so gehört das Kind in gesichertem Kindersitz auf den Beifahrersitz.
Not sure if this goes for you. Looks like you need a special seat.

Yes, that's right, too. Kids until 1,5 meter or 12 years always needs a child seat. But that doesn't have anything to do with a classic car. It's the law anyway :)

Oh man, ripped off.

I went out to measure my front centre (Oz Spelling) belts and the mighty Fleetwood doesn't have one. :-(

RSS

Photos

  • Add Photos
  • View All

Forum

Power Booster Install

Started by Rob Spring in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 10 hours ago. 5 Replies

Hey! I’ve seen the 63/64 power booster and master cylinder combination has been covered very clearly. I’m in the process of replacing mine. I was hoping someone could give me insight on a specific…Continue

Complete Front End Rebuild

Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Mark Mata on Thursday. 1 Reply

I meant to make this a priority over the winter and didn't get that far. I've tried to source all the parts individually, but that is a daunting task. Partly because I don't want to miss any…Continue

1964 Cadillac Deville Neutral Safety switch and Oil Filter Housing Assembly

Started by Michael Monson in Wanted to Buy. Last reply by Russ Austin on Wednesday. 1 Reply

Hello, possibly looking a neutral safety switch for a 1964 Deville with the TH-400 and tilt steering.  Also, possibly looking for an oil filter housing assembly for a 1964 429 motor.  Starting to get…Continue

A Shout Out to Alan Grist & Some Pictures of His 1964 Series 62 4W Sedan

Started by Jason Edge in General Discussion. Last reply by Dennis P. DiBari on Wednesday. 2 Replies

As they say, Better Late Than Never!I want to give a shout out to 63/64 Chapter Member Alan Grist, who brought his 64 Series 62 Four Window Sedan, to the 2025 CLC Winter Board Meeting in Chattanooga,…Continue

Blog Posts

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 13 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service