Does anyone know the length of the webbing of the center front seat belt? Or can anyone measure it? I got a knuckle and have the correct webbing material.
Tags:
Christian,
Jason had posted this in the help section:
http://6364cadillac.ning.com/photo/illustration2?context=album&...
And this:
http://6364cadillac.ning.com/forum/topics/seat-belt-fabric-length
Although no dimension is given for a front center belt, It seems likely to me that it would be the same as the other front belts without a retractor. Unfortunately that dimension is not given here.
I do have a pair of non-retracting belts that I believe came original in my '63 convertible. I can measure those for you if you want.
Thank you Jason. If you would measure the center webbing this would be great. I have the seat belt installation instructions too, but without any dimensions.
I have the factory belts in mine, I can measure it late on today.
I always run with the arm rest down, and I have to be honest, I don't recall a centre belt in the Fleetwood.
That would be great! In Germany we need seat belts at the front center seating position to have the permission transporting 3 persons on the front bench if the outer positions already have seat belts.
These measurements are very close to the ones Jason has for the retracting belts in the help section.
Perfect! Thank you so much!
Yes you are right if you are an adult :) Kids until 12 have to buckled up, no matter what year the car was build. It's a big problem with cars, which never had seat belts. You always need a special inspection if you add seat belts in that kind of car. That was the reason I added seat belts. My boys are 4 and 7 now.
If you don't have seat belts, the car always will be registered with 5 seats. If you have seat belts on all 6 positions, you can add the 6th passenger in your papers. Wired but that's the law in Germany ;)
Yes, that's right, too. Kids until 1,5 meter or 12 years always needs a child seat. But that doesn't have anything to do with a classic car. It's the law anyway :)
Oh man, ripped off.
I went out to measure my front centre (Oz Spelling) belts and the mighty Fleetwood doesn't have one. :-(
Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion. Last reply by Linda M. Brooks on Thursday. 5 Replies 1 Like
Out of curiosity,, is the 63 64 engine capable of burning rubber off of a stop light? Not a hold the brake and rev up and release, but from a stop, to burn rubber power?I know mine wont because i…Continue
Started by Kenneth Barton in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin on Wednesday. 1 Reply 0 Likes
Hi everyone, I installed a new gas tank sender in my 63 after bench testing it and confirming ohm range on the bench.However after installing and filling it up, it only reads half full after filling…Continue
Started by Jeff Donaldson in General Discussion. Last reply by Dennis P. DiBari on Monday. 1 Reply 0 Likes
Hi,It's time to do a brake job on my Fleetwood. When I imported my car from the US to Canada I had to have my car safety inspected before I could license it in the Privince of BC. After the…Continue
Started by Michael Monson in 1963/64 Cadillac Specific Discussion. Last reply by Michael Monson on Sunday. 6 Replies 0 Likes
I'm currently rounding up parts for a heater core replacement in my 1964 Deville. I'm looking for replacement hoses that connect to the heater core itself. It's a factory a/c car and has the metal…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
© 2026 Created by Jason Edge.
Powered by