I have a question about the padding  used between the  headliner and  interior roof of hardtops . It's abt 1/8" thick and  I  want to remove this from my parts car because I use it for storage ; with the headliner badly torn , it's making a mess.  I figure with the  period these cars were built , possibility  of asbestos  exists . If so, I'll probably  just use a roller and paint over it . Comments?

Facebook Facebook

Views: 154

Reply to This

Replies to This Discussion

If the headliner is no good and just using for storage I would rip out the headliner, rip out the insulation, and remove the listing wires (thin rods that run from side to side that support the headliner) and # them front to rear if you plan to reuse. That insulation is very flammable and is a mess once it starts coming a part and don't mess around with it and trash it and save the listing wires from all of my parts cars. Some body styles, and depending on production date, had removable center roof bows. I will also remove those. If they are welded in place I usually leave them for the metal yard..  If you plan to replace the headliner with original or something similar be sure to save a good sample of it. Be sure to also note the trim code on the body plate on top of cowl. I usually save mine in an air tight bag and note the body style and trim code. 

 Thanks Jason,   yes , I want to just get rid of the headliner and  padding , it's  never gonna be on the road again. Until I can find out about possible asbestos , this project's on hold ; I'll move onto something else. Guess I could wear a filter mask , but afraid I'd start a  PANIC!

Not sure.. I've ripped 51 of them out, no mask and still here.  If concerned I would wear the mask. It doesn't take but a few minutes to get it out and if you think it does have any carcinogens, it is probably going to do you more long term damage if it just remains there above your head especially if it is already coming apart and out.

Thanks again, Jason. A very valid point indeed !  Yeah, I'll just wear a filter mask, I can just explain if the county health dept  shows up ; only half kidding! The people around here, Jeesh!

RSS

Photos

  • Add Photos
  • View All

Forum

A Big Shout Out in Pictures to Robert Kirnard and His 49K Mile 1964 Fleetwood 60 Special!

Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari 6 hours ago. 1 Reply

A Big Shout Out to Robert Kirnard, 1963-64 Cadillac Chapter Member, who just picked up this super clean and great running 49K Mile 1964 Fleetwood 60 Special. He drove it to our Carolina Region CLC…Continue

Comfort Control working as it should

Started by Christian Doerk in General Discussion. Last reply by Chris McBride 10 hours ago. 1 Reply

Hi friends,after checking all the functions of my Comfort Control of my 1964 Fleetwood, everything is working as it should. The control of the temperature is working really well, except one…Continue

Tags: Control, Comfort

Rear Main Seal Oil Leak Fix with Bearing Cap Modification

Started by Kurt in 1963/64 Cadillac Specific Discussion. Last reply by Christian Doerk yesterday. 18 Replies

Many owners have reported oil leaks at the rear main seal even after replacing the seal, myself included. Recently Tony Lentini found a Serviceman bulletin published in February 1965 which details a…Continue

Coolant Overflow Bottle / Reservoir for 64 Cadillac Eldorado

Started by Michael Stinson in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf on Thursday. 9 Replies

Greetings Everyone.  I read a discussion thread about "radiator and related", covering coolant overflow.  Has anyone fitted an overflow reservoir / bottle to their 64 Cadillac?  Is there if a…Continue

Tags: Radiator, Bottle, Reservoir, Overflow, Coolant

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service