Trivia Question 23 - NAME THAT PART!
OK, We have not done trivia in a while and ran across this items yesterday working on a parts car and thought it would be a good trivia question. See picture below and name that part!
Two hints: It fits inside something and definitely not something you would find on every 1963/64 Cadillac.
Replies to This Discussion
-
Permalink Reply by Ray Schick on
-
Is it inserted into a hose to prevent collapsing ? Or is it used on a door panel like for a window crank ? Or is it put in the gas tank neck to prevent someone from siphoning gas ….
-
Permalink Reply by Jason Edge on
-
OK... 3 guesses and the 3rd is correct. It is rather large, and goes in the metal gas tank filler neck to prevent siphoning gas. I guess it would prevent anything from getting pushed into the tank.. but siphoning gas prevention would be the main use!
SO, RAY.... HAVE A CIGAR!!!
-
Permalink Reply by 24ro8f5mbs2jc on
-
Size matters. Even if wife says it doesn't... ;-)
Can I suggest using a reference like a BIC-lighter or a soda-can to get an idea about size for next trivia?
-
-
I intentionally didn't want to give a size reference! In fact I tried to take picture in a way that would not indicate size. Makes it more fun not knowing the the size!
Photos
Members
Forum
Burning Rubber
Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion. Last reply by Linda M. Brooks on Thursday. 5 Replies 1 Like
Out of curiosity,, is the 63 64 engine capable of burning rubber off of a stop light? Not a hold the brake and rev up and release, but from a stop, to burn rubber power?I know mine wont because i…Continue
Gas gauge only reads half when full
Started by Kenneth Barton in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin on Wednesday. 1 Reply 0 Likes
Hi everyone, I installed a new gas tank sender in my 63 after bench testing it and confirming ohm range on the bench.However after installing and filling it up, it only reads half full after filling…Continue
64 Brakes
Started by Jeff Donaldson in General Discussion. Last reply by Dennis P. DiBari on Monday. 1 Reply 0 Likes
Hi,It's time to do a brake job on my Fleetwood. When I imported my car from the US to Canada I had to have my car safety inspected before I could license it in the Privince of BC. After the…Continue
Heater Core Replacement
Started by Michael Monson in 1963/64 Cadillac Specific Discussion. Last reply by Michael Monson on Sunday. 6 Replies 0 Likes
I'm currently rounding up parts for a heater core replacement in my 1964 Deville. I'm looking for replacement hoses that connect to the heater core itself. It's a factory a/c car and has the metal…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
New old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
© 2026 Created by Jason Edge.
Powered by
